User Manual

- 27 -
Chapter 3 Advanced Adjustment/Setting
Function
Input Signal
(The setting range of each function differs
depending on the input signal.)
√: Settable -: Not settable
Setting Range Description Note
DisplayPort
HDMI
DVI
D-Sub
PC
signal
Video
signal
Sharpness √ √ √ √ √ 1 to 5 When a low-resolution image is displayed in “Full
Screen” or “Aspect Ratio” mode, text or lines in the
displayed image may be blurred. This function reduces
this blurring effect.
• The sharpening setting may not
be required depending on the
display resolution. (“Sharpness”
cannot be selected in such
cases.)
Input Color Format √ - - - - Auto
YUV
RGB
The color format of the input signal can be specied.
Try changing this setting if colors are not displayed
correctly.
• This setting is required when
a DVI device is connected
to the monitor via the HDMI
connector port using a DVI-
HDMI conversion connector.
• This setting is xed to “RGB”
when receiving a DVI signal
from the DVI connector.
- √ - - - YUV 4:2:2
YUV 4:4:4
RGB
- - √ - - Auto
YUV 4:2:2
YUV 4:4:4
RGB
Range Extension √ - √ - - Auto
On
Off
Depending on the PC, black and white of the video
level of the signal output to the monitor may be limited.
If a limited signal is displayed on the monitor, black
will appear faint and white will appear dull, leading to a
reduction in contrast. The output range of such signals
can be extended to match the actual contrast ratio of
the monitor.
• “Auto”
Automatically identies the brightness range of the
input signal and displays the image accordingly.
• “On”
Extends the signal output range through 0 to 255
and displays the image.
• “Off”
Extension of the signal output range is not
performed.
• Example settings
- Off
- On
• This setting is xed to “Off” for
DVI signal input.
- √ - - - On
Off