User Manual

- 26 -
Chapter 3 Advanced Adjustment/Setting
●
Signal Settings
Set the method for outputting the signal input from the PC to the monitor.
Function
Input Signal
(The setting range of each function differs
depending on the input signal.)
√: Settable -: Not settable
Setting Range Description Note
DisplayPort
HDMI
DVI
D-Sub
PC
signal
Video
signal
Picture Expansion √ √ - √ √ Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be changed.
• “Auto”
The monitor automatically changes the screen
size according to the aspect ratio and resolution
information from the PC.
• “Full Screen”
Images are stretched to full screen. Since aspect
ratios are not maintained, images may be distorted
in some cases.
• “Aspect Ratio”
Images are enlarged to full screen without
changing the aspect ratio. Since aspect ratios are
maintained, blank horizontal or vertical borders
may appear.
• “Dot by Dot”
Displays the image at the set resolution or size
specied by the input signal.
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (input signal)
• If the monitor is EV2455 and
the resolution is set to 1920
× 1080, only “Full Screen” is
available.
- - √ - - Auto
Full Screen
Aspect Ratio
Dot by Dot