User Manual

- 28 -
Chapter 3 Advanced Adjustment/Setting
Function
Input Signal
(The setting range of each function differs
depending on the input signal.)
√: Settable -: Not settable
Setting Range Description Note
DisplayPort
HDMI
DVI
D-Sub
PC
signal
Video
signal
Analog
Adjustment
Auto
Screen
Adjust
- - - - √ - Screen ickering, display position, and size can be
adjusted automatically. Selecting “Auto Screen Adjust”
displays a message. Select “Yes” to enable this
function.
• The automatic screen
adjustment function works
correctly when an image is
fully displayed over the entire
displayable area of the screen.
It does not work properly in the
following cases:
- When an image is only
displayed on part of the
screen (command prompt
window, for example)
- When a black background
(wallpaper, etc.) is used
Also, this function may not work
properly with some graphic
boards.
• When a signal is input into the
monitor for the rst time or
when a resolution or vertical/
horizontal scan frequency not
used before is set, the self
adjustment function will activate
automatically (only for signals
with a resolution of 800×600
(SVGA) or higher).
Auto
Range
Adjust
- - - - √ - Every color gradation (0 to 255) can be displayed
by automatically adjusting the signal output level.
Selecting “Auto Range Adjust” displays a message.
Select “Yes” to enable this function.
-