User Manual

- 35 -
Chapter 4 Administrator Settings
4-2. Functions of the “Administrator Settings” Menu
Function Setting Range Description Note
Auto Input Detection On
Off
This monitor recognizes the connector through which PC signals
are input and displays images on the screen accordingly. When a
PC is turned off or enters power saving mode, any other available
signal is displayed automatically.
When this function is set to “Off”, the monitor displays the signal
from the selected connector regardless of whether a signal is
input or not. In this case, select the input signal to display using
the
operation switch on the front of the monitor.
• When this function is set to “On”, the monitor only
enters power saving mode after all connected PCs
have entered power saving mode or have been
switched off.
DP HPD Control On
Off
When a PC is connected via the DisplayPort connector, window
and icon positions may shift when power is turned off/on. If this
happens, set this function to “On”.
-
HDMI HPD Control On
Off
When a PC is connected via the HDMI connector, the screen
may not be displayed depending on the device. If this happens,
set this function to “On”.
-