User manual

General Use
93
3.13.8 Warnings
Any warnings registered by the system will be displayed in the Warnings menu. Open a warning
in the list to get more information about the warning.
The following warnings may be displayed if detected by the system, depending on system type
and configuration:
ISDN BRI warnings
 ISDN is enabled on BRI line x, but the line is not connected. Please check your network
connection or disable the line. (101)
 There is something wrong with ISDN BRI line x. Please check your network connection.
(102)
IP network quality warnings
 The system is experiencing, equal to or more than 5%, packet loss in the IP network.
This may affect the quality of the call.
 The system is experiencing high jitter, equal to or more than 200 ms, in the IP network.
This may affect the quality of the call.
 The system is dropping IP packets due to latency in the network. This may affect the
quality of the call.
ISDN PRI warnings
 ISDN PRI is configured for this system, but the line is not connected. Please check your
network connection or disable the network. (131)
 There is something wrong with the ISDN PRI line (Blue alarm). Please check your
network connection. (132)
 There is something wrong with the ISDN PRI line (Yellow alarm). Please check your
network connection. (133)
 There is something wrong with the ISDN PRI line (D-Channel not active). Please check
your network connection. (134)
External Network warnings
 External Network is configured for this system, but the line is not connected. Please
check your network connection or disable the network. (161)
Leased E1/T1 warnings
 Leased E1/T1 is configured for this system, but the line is not connected. Please check
your network connection or disable the network. (191)