User`s manual

26
Chapter6Reference
●
To set input signal selection
Setting Function
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Choosean
inputsignalcombinationyouwanttodisplaywith
.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Selection” from “Tools”, and press
.
3. Select “Auto” or “Manual” with
or .
4. Press
to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in the
power saving mode.
●
To set input signal combination
You can limit the input signal combinations to choose with . Select “On” for the signal combinations
you want to display. After this, the input signal combination switches to the specied ones only.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Preset” from “Tools”, and press
.
3. Choose an input signal combination with
or , and press .
4. Select “On” or “Off” with
or .
5. Press
to exit.
Attention
• You cannot set all the combinations disable. Set at least one input signal combination to “On”.