User`s manual

English
CAUTION
If you plan to leave the unit unused for an extended period, disconnect
the power cord from the wall socket after turning off the power button
for the safety and the power conservation.
This product is only suitable for a patient environment, but not for
contact with a patient.
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product may not be covered by warranty for uses other than those described in this manual.
The specifications noted in this manual are only applicable when the following are used:
• Power cords provided with the product
• Signal cables specified by us
Only use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the
monitor 30 minutes or more after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term
use and maintain a stable display.
When the screen image is changed after displaying the same image for extended periods of time,
an afterimage may appear. Use the screen saver or power save function to avoid displaying the
same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation
lifetime. (Refer to “Cleaning” on the next page.)
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit
pixels may appear on the LCD panel, this is not a malfunction. Percentage of effective dots:
99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to
flicker, please contact your dealer.
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the panel.
When the monitor is cold and brou
g
ht into a room or the room tem
p
erature
g
oes u
p
q
uickl
y
, dew
condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not
turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause
some damage to the monitor.
8 PRECAUTIONS