User`s manual

English
4-2. Color Adjustment
In the analog input, perform the “Range Adjustment” (p.23) before making the
color adjustments.
The <Color> menu in the ScreenManager enables to change the color of the screen. By
using the <Color Mode>, the adjustment mode can be selected from <Custom> mode (to
adjust the color settings according to your preference) and <sRGB> mode.
NOTE
• Allow the LCD monitor to stabilize for at least 30 minutes before making image
adjustments. (Allow the monitor to warm up for at least 30 minutes before making
adjustments.)
• Performing the <Reset> of the <Color> menu returns the color settings to the
default settings.
• The values shown in percentages represent the current level within the specific
adjustment. They are available only as a reference tool. (To create an uniform white
or black screen, the percentages for each will probably not be the same.)
Adjustment Contents
Color Mode Menu
Custom sRGB
Function Descriptions Adjustable range
To set the brightness of the
screen
0 ∼ 100%
Brightness
√ √
NOTE
• The values shown in the “%” are available only as
reference.
• Direct pressing the up and down control button also
can adjust the brightness (When ScreenManager
does not appear.). After the adjustment, press Enter
button to save the data.
To set the color temperature
4000 ∼ 10000 K
in 500 K increments
(including 9300 K).
Temperature
(p.34)
√
-
NOTE
• The values shown in the Kelvin are available only as a
reference tool.
• While color temperature is adjusted, <Gain> is
adjusted automatically according to the color
temperature.
• Setting the temperature under 4000 K or over 10000 K
invalidates the color temperature setting. (The color
temperature’s setting turns “Off”.)
• Setting the <Gain> invalidates the <Temperature>
adjustment.
24 4. ADJUSTMENT