User`s manual

English

2-2. Connecting the signal cable

NOTE

x Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor

and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Analog Input

Signal Cable Connector of PC PC

Signal Cable (enclosed, MD-

C87)

Video Output

Connector/ D-Sub

mini 15 pin

Input Connecor

(monitor)/ D-Sub

mini 15 pin

xStandard graphics card

Digital Input

Signal Cable Connector of PC PC

FD-C39 (Optional)

Video Output

Connector DVI-I

Input Connecor

(monitor)/ DVI

xDigital Graphics card

2. Plug the enclosed touch panel cable (FD-C38) into the RS-232C port

of the monitor. Then, plug the other end of the cable into the COM

port of the PC.

3. Power Cord 2.Touch Panel Cable

1. Signal Cable

Analog Signal Input Connecter

Digital Signal Input Connecter

2. CABLE CONNECTION