User`s manual

English
Problems Points to check with possible solutions
15.Cursor position is not correct. /
Cursor jumps.
When cursor position is incorrect or cursor
jumps, turn off and on the monitor.
xThe drawing touch (touch operation with
dragging the finger on the touch panel) to
draw the picture may cause incorrect cursor
position.
xChanging the position or angle of the
monitor while the monitor operation will
cause cursor jump.
xKeep metals away from the panel surface.
xPoint and touch with one finger only. Keep
other fingers away from the touch screen.
Do not rest the hand in the monitor or bezel
while touching the screen.
xDo not touch the screen while the computer
is starting. Touch the screen after
disappearing TouchWare starting window.
xDo not touch the screen while turning on the
monitor. Touch the screen one second later
after appearing the image.
xThe spray for preventing static electricity
may influences the sensibility of the touch
panel. Do not use it on cleaning.
30 6. TROUBLESHOOTING