PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Power Indicator/EIZO Logo Display Setting 2-6 Locking Buttons 2-7 Setting Adjustment menu Display 2-8 Viewing Information/Setting Language 2-9 Setting BrightRegulator 2-10 Resumption of Default Setting Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor C
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2006-2010 EIZO NANAO CORPORATION All rights reserved.
PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor.
WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors.
WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots.
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels: 99.9994% or higher. The backlight of the LCD panel has a fixed life span.
CONTENTS PRECAUTIONS....................................................... 1 2-6 Locking Buttons............................................. 17 ● To lock operation [Adjustment Lock].................. 17 LCD Panel.................................................................... 5 2-7 Chapter 1 Features and Overview...................... 7 1-1 Features............................................................. 7 1-2 Buttons and Indicators.....................................
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-D and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24.
1-3 Functions and Basic Operation To adjust the screen and color Adjustment menu (Refer to page 9 for operation) (for analog signal input only) 1 Screen Adjustment Page 11 (Automatic Adjustment) ● [Screen] to adjust flickering and position………………………………… see page 11 ● [Range] to adjust color gradation automatically… ……………………… see page 13 Adjustment menu (Refer to page 9 for operation) (for analog signal input only) Adjustment menu (Refer to page 9 for operation) Page 14 Color Adjustment Advanced Adjus
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Information Page 18 ● [Information] to check displayed input signals, monitor information, usage time, etc. Adjustment menu (Refer to below for operation) Language Page 18 ● [Information] to check settings, usage time, etc. Set the off timer ● [Off Timer] to set the monitor power off time … ……………………………………… see page 16 ● [Language] to select Adjustment menu language.
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to “readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures. Item Overview A “readme.
2-2 Screen Adjustment Digital Input Attention • Wait 30 minutes or more from monitor power on before starting adjustments. When digital signals are input, images are displayed correctly based on the preset data of the monitor. Analog Input The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used.
3 NOTE Perform advanced adjustments for the following using the menu of the Adjustment menu. ● To eliminate vertical bars [Clock] (1) Choose from the menu, and press The menu appears. (2) Adjust the clock with or , and press The adjustment is completed. . • Press the control button slowly so as not to miss the adjustment point. • When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering or blurring. .
4 Adjust the signal output range ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. from the menu, and (1) Choose . press (2) Choose , and press . (3) Color gradation is adjusted correctly by the auto-adjustment function. The output range is adjusted automatically to display images with the maximum color gradation.
2-3 Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. from the menu. (1) Choose (2) Choose [Custom], [sRGB] or [Text] with or , and press . ● FineContrast Mode An appropriate display mode is selectable out of three modes. Mode Purpose Custom Available for making desired setting. sRGB Suitable for color matching with sRGB compatible peripherals.
Attention Advanced Adjustments [Adjustment menu] Independent setting and saving of color adjustment are available for each FineContrast mode.
2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] Attention This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. • The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice.
2-6 Locking Buttons ● To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked • Buttons that cannot be locked • (Power button) • (Input signal selection button) • (Volume control button) or control button)*1 (Enter button) Adjustments/settings using Adjustment menu • (Brightness (Brightness control button)*2 [Procedure] (1) Press (2) Press to turn off the unit. again while pressing .
2-8 Viewing Information/Setting Language ● To check viewing information, usage time, etc. NOTE • The usage time is not always “0” when you purchase the monitor due to factory inspection. [Information] This function allows you to check viewing information, model name, serial number, and usage time of the monitor. (1) Choose from the Adjustment menu, and press The menu appears. (2) Then, press . to check viewing information, etc.
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples D-sub mini DVI-D connector 15-pin Connector To PC 1 To PC 2 D-sub mini 15-pin Connector DVI-D connector Signal cable (Digital) FD-C39 Signal cable MD-C87 Selecting input signal Input Signal Selection button Switch the input signal with . Input signal switches each time is pressed.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems → See No.3 - No.11. • Other problems → See No.12. Problems 1. 2. Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. If the problem persists, turn off the monitor, and then turn it on again a few minutes later. • Power indicator is lighting blue.
Problems Possible cause and remedy 8. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a on the screen. failure. 9. Interference patterns or fingerprints remain on the • Leave the monitor with a white screen. The symptom screen. may disappear. 10. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function. 11. The auto-adjustment function does not work correctly.
Chapter 5 Reference 5-1 Attaching an Arm (Option) The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2 Remove the stand. (Prepare a screwdriver.) Unscrew the four screws securing the unit and the stand with the screwdriver. 3 Attach the monitor to the arm or stand.
5-2 Power Saving Mode Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Operating Power saving Power Indicator Monitor STAND-BY SUSPENDED OFF Operating Blue Power saving Orange [Resumption Procedure] (1) Operate the mouse or keyboard to resume the normal screen. Digital input This monitor complies with the DVI DMPM standard. [Power Saving System] The monitor enters the power saving mode in fi ve seconds in connection with the PC setting.
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DVI (Digital Visual Interface) DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
5-5 Preset Timing The following table shows factory preset video timing. Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA 720×400@70Hz 28.3 MHz Macintosh 640× 480@67Hz Macintosh 832× 624@75Hz Macintosh 1152× 870@75Hz Macintosh 1280× 960@75Hz 30.2 MHz 57.3 MHz 100.0 MHz 126.2 MHz PC-9801 640×400@56Hz 21.0MHz PC-9821 640×400@70Hz 25.2 MHz VESA 640×480@72Hz 31.5 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@56Hz 36.0 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@72Hz 50.
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan S1701, S1721, S1731, S1901, S1911, S1921, S1931 is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse: http://www.eizo.de.
