Important Please read PRECAUTIONS, this User’s Manual, and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC to using the monitor. • The latest User’s Manual is available for download from our web site: http://www.eizo.
Location of Caution Statement This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
Notice for this monitor Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
CONTENTS Cover....................................................................... 1 Notice for this monitor............................................. 3 CONTENTS.............................................................. 5 Chapter 1 Introduction........................................ 7 1-1. Features.......................................................... 7 1-2. Controls and Functions................................ 8 1-3. EIZO LCD Utility Disk....................................
-3. Making Use of USB (Universal Serial Bus)................................................................ 40 ●●Required System Environment...................... 40 ●●Connection Procedure (Setup of USB Function)................................ 40 6-4. Displaying monitor information..................41 ●●Displaying signal information “Signal Info”.....41 ●●Displaying Monitor Information “Monitor Info”...................................................41 6-5. Specifications.....................
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • • • • • • 27.0″ wide format LCD Applicable to the resolution of 2560 × 1440. IPS panel with 89° horizontal and vertical viewing angles Applicable to Displayport / Mini DisplayPort (applicable to 8 bit or 10 bit) 3 signal input terminals (DVI-D × 1, DisplayPort × 1, Mini DisplayPort × 1) The FineContrast function allows the user to select the display mode optimum to the displayed image.
Note • This monitor supports the portrait display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position (see “3-3. Setting Orientation “Orientation”” (page 24)). • For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When placing the monitor in a “Portrait” position, settings of your graphics board need to be changed.
1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ●●Disk contents and software overview The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt file on the disk for software startup procedures or file access procedures. Item Overview Readme.txt file ScreenManager Pro for LCD Software for adjusting the screen using the mouse and keyboard.
2. Adjusting/Setting 1. Choose a menu to adjust/set with , , and then press . 2. Choose an item to adjust/set with , , and then press . 3. Adjust/set the selected item with , , and then press 3. Exiting 1. Press . a few times. The Adjustment menu finishes. ●●Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with “Portrait” position, the button guide appears next to the button.
●●Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main menu Color Setting Reference “2-3. Adjusting Color” (page 15) Brightness Contrast Temperature Gamma Advanced Settings Hue Saturation Contrast Enhancer Outline Enhancer Gain 6 Colors Screen Power Manager Menu Settings Color Reset “3-10. Return To Default Setting” (page 28) Screen Size “2-4. Selecting Screen Size” (page 21) Overdrive “2-5.
Tools Input Selection “To set input signal selection “Input Selection”” (page 39) Input Skip “3-9. To Disable Input Signal “Input Skip”” (page 28) Mode Preset “3-1. Enabling/Disabling Mode Selection “Mode Preset”” (page 23) Signal Info “6-4. Displaying monitor information” (page 41) Monitor Info All Reset “3-10. Return To Default Setting” (page 28) * The adjustment/settings available on “Color” depend on the selected mode. (See “2-3. Adjusting Color” (page 15).
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ●●Digital Input (DVI-D: Single Link) Resolution Applicable Signals 640 × 480 720 × 400 800 × 600 1024 × 768 1280 × 960 1280 × 1024 1600 × 1200 1920 × 1080*1 1920 × 1080 1920 × 1200 2560 × 1440*2 VGA VGA TEXT VESA VESA VESA VESA VESA 1080p@50 CEA-861 VESA CVT RB Single Link 10bit Vertical Scan Frequency Dot Clock 60 Hz 70 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 50 Hz 60 Hz 60 Hz 30 Hz 162 MHz (Max.
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ●●Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog box, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the “OK” button. 6.
2-3. Adjusting Color ●●To select the display mode (FineConstrast mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose 1-User1 Select one of these user modes to define a desired set of parameter settings. 2-User2 3-User3 4-Paper Produces a printed paper effect by decreasing contrast and color temperature. 5-Text Suitable for displaying texts for word processing or spreadsheets.
●●To perform advanced adjustments “Color” of the Adjustment menu allows you to configure and save a separate set of color settings for each mode. Attention • The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more after turning the monitor power on before starting adjustment. • The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
●●To adjust brightness “Brightness” The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Adjustable range 0 to 100% Procedure 1. Press or . The Brightness menu appears. 2. Use or for adjustment. to exit. 3. Press Note • When your feel the image is bright even if the brightness is set to 0%, adjust the contrast. • Alternatively, you can use “Brightness” under “Color” in the Adjustment menu to adjust it.
●●To adjust color temperature “Temperature” The color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame temperature. The gain preset values are set for each color temperature setting value.
●●To adjust color saturation “Saturation” This function allows you to adjust color saturation. Adjustable range -100 to 100 Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Advanced Settings” from “Color”, and press 3. Choose “Saturation”, and press 4. Use or 5. Press . . for adjustment. to exit. Attention • Using this function may make some color gradations unavailable for display. Note • The minimum value (-100) changes the screen to monochrome.
●●To adjust gain “Gain” The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain. Adjustable range 0 to 100% Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Advanced Settings” from “Color”, and press 3. Choose “Gain”, and press . . 4. Choose the color to adjust from “Red”, “Green”, and “Blue”, and then press 5. Use or . for adjustment. to exit. 6.
2-4. Selecting Screen Size ●●To change screen size “Screen Size” The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function from “Screen”. Setting Function Full Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Enlarged Displays an image in full screen.
2-6. Enabling/Disabling Auto Sharpness “Auto Sharpness” By enabling Auto Sharpness outlines will be adjusted according to the displayed image which can improve its feel and texture. Procedure . 1. Choose “Screen” from the Adjustment menu, and press 2. Choose “Auto Sharpness” from “Screen”, and press 3. Select “On” or “Off” with 4. Press . or . to exit. Note • The extent of adjustment depends on the setting value of “Outline Enhancer”.
Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection “Mode Preset” Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2. Choose “Mode Preset” from “Tools”, and press 3. Use or to select the mode to change, and press 4. Select “On” or “Off” with 5. Press . . or . to exit. Attention • You cannot set all the modes disable.
3-3. Setting Orientation “Orientation” This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. Procedure . 1. Choose “Menu Settings” from the Adjustment menu, and press . 2. Choose “Orientation” from “Menu Settings”, and press 3. Select “Landscape” or “Portrait” with or . to exit. 4. Press 5. When selecting “Portrait”, turn the monitor screen 90° in clockwise direction.
3-6. Locking Buttons “Key Lock” This function allows you to lock the adjusted/set status to prevent changing them. Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3. Choose “Key Lock” from “Optional Settings”, and press 4. Choose “Off”, “Menu”, or “All” with Settings or , and press . .
3-8. Setting the Input Signals “Signal Selection” Signals can be selected based on your operating environment. Attention • The graphics board supporting signal display is required. • Refer to the User’s Manual of the graphics board. ●●To connect DVI (Single Link) Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3. Choose “Signal Selection” from “Optional Settings”, and press 4.
●●To connect DVI (Simple display of HDMI signal from digital camera) An HDMI signal from a digital camera can be simply displayed by means of connecting this product and the digital camera using a DVI-HDMI converter cable. Attention • For displaying the PC signal, “Single Link” or “Dual Link” should be set. Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3.
3-9. To Disable Input Signal “Input Skip” This function allows skipping of the set input signals when the input signals are switched. When not all the input signals are displayed or when keeping the input signals unchanged, set “Input Skip” to “On” for the signals to be disabled. Procedure . 1. Choose “Tools” from the Adjustment menu, and press . 2. Choose “Input Skip” from “Tools”, and press 3. Choose the input signal to set with 4. Select “On” or “Off” with or , and press . or . to exit. 5.
Chapter 4 Power Saving Functions 4-1. Setting Power Saving “Power Save” This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention • Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
4-2. Setting the power saving mode when a person leaves the monitor “EcoView Sense” The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1” to “Level-4” of the EcoView Sense function. When a person moves away from the monitor, it shifts to the power saving mode automatically and does not display the images on the screen to reduce the power consumption.
4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView” The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. Procedure . 1. Choose “PowerManager” from the Adjustment menu, and press . 2. Choose “Auto EcoView” from “PowerManager”, and press 3.
4-6. Displaying the power saving ratio “EcoView Index” This indicator shows the power saving ratio, power reduction and CO2 reduction as a result of the brightness of the monitor. Procedure . 1. Choose “PowerManager” from the Adjustment menu, and press 2. Choose “EcoView Index” from “PowerManager”, and press . The “EcoView Index” appears. (Example) Note Power reduction: the backlight’s reduction of power consumption as a result of the adjusted brightness value.
Chapter 5 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. 5-1. No picture Problem 1. No picture • Power indicator does not light. • Power indicator is lighting blue. • Power indicator is lighting orange. • Power indicator flashes orange and blue. 2. The message below appears. • This message appears when no signal is input. Example: Possible cause and remedy • Check whether the power cord is connected properly.
Problem • The message shows that the input signal is out of the specified frequency range. (Such signal frequency is displayed in magenta.) Example: fD: Dot clock fH: Horizontal scan frequency fV: Vertical scan frequency 34 Chapter 5 Troubleshooting Possible cause and remedy • Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor (see “2-1. Compatible Resolutions” (page 13)). • Reboot the PC.
5-2. Imaging problems Problem Possible cause and remedy 1. The screen is too bright or too dark. • Use “Brightness” or “Contrast” in the Adjustment menu to adjust it. (The LCD monitor backlight has a limited life span. When the screen becomes dark or begins to flicker, contact your local dealer.) • Turn on the “Auto EcoView” function in the Adjustment menu. The monitor detects the environmental brightness to adjust the screen brightness automatically (see “4-3.
5-3. Other problems Problem 36 Possible cause and remedy 1. The adjustment menu does not appear. • Check whether the operation lock function works (see “3-6. Locking Buttons “Key Lock”” (page 25)). 2. No mode menu is displayed. • Check whether the operation lock function works (see “3-6. Locking Buttons “Key Lock”” (page 25)). (When using EcoView Sense) The images remain to be displayed when you move away from the monitor. / The images do not reappear when you come near it.
Chapter 6 Reference 6-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm or stand, follow the instructions of their User’s Manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
6-2. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display.
●●To switch among input signals The input signal switches each time is pressed. When the signal is switched, the active input port name appears at the top right corner of the screen. Note • You can skip a specific input signal. For more information, see“3-9. To Disable Input Signal “Input Skip”” (page 28). ●●To set input signal selection “Input Selection” Setting Function Auto The monitor recognizes the connector through which PC signals are input.
6-3. Making Use of USB (Universal Serial Bus) This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices. ●●Required System Environment 1. A PC equipped with a USB port or another USB hub connected to a USB compatible PC 2. Windows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later 3.
6-4. Displaying monitor information ●●Displaying signal information “Signal Info” This function displays the information about the current input signals displayed. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2. Choose “Signal Info” from “Tools”, and press . The “Signal Info” appears. (Example) ●●Displaying Monitor Information “Monitor Info” This function displays the information about the monitor. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2.
6-5. Specifications LCD Panel Size 27.0-inch (680 mm) TFT color LCD Viewing angles Horizontal 178°, vertical 178° (CR≥10) Dot pitch 0.2331 mm Response time Black-white-black: Approx. 12 ms Gray-to-gray: Approx. 6 ms Horizontal scan frequency 26-89 kHz Vertical scan frequency 23.75-63 Hz (non-interlace) (VGA TEXT: 69-71 Hz) Resolution 2560 dots × 1440 lines Max. dot clock 242 MHz Max. display color Approx. 1073.
Main Default Settings FineContrast mode User1 Screen Size Full Overdrive On Power Save On EcoView Sense Level-3 Auto EcoView On Eco Timer Off Language English Menu Position Center Input Selection Manual Outside Dimensions Unit: mm (inch) 616 (24.3) 172° 279 (11.0) 23.5 (0.93) TILT 25° 58 (2.28) 256.5 (10.1) 45.5 (1.79) 255 (10.0) 281.5 (11.1) 31 (1.22) 273 (10.7) 100 (3.9) 156.6 (6.2) 145.4 (5.7) 100 (3.9) 106 (4.2) 604 (23.8) 381 (15.0) 215 (8.5) 174.5 (6.9) 15.5 (0.
6-6. Glossary DDC/CI (Display Data Channel / Command Interface) VESA provides the standardization for the interactive communication of the setting information, etc. between a PC and the monitor. DisplayPort DisplayPort is a next-generation digital AV interface that allows connection of the PC, audio, imaging devices, etc. to the monitor. One cable can transfer sound with images. DVI (Digital Visual Interface) DVI is a digital interface standard.
Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of horizontal 2560 pixels and 1440 vertical pixels. At a resolution of 2560 x 1440, all pixels are illuminated as a full screen (1:1). sRGB (Standard RGB) International standard for color reproduction and color space among peripheral devices (such as monitors, printers, digital cameras, scanners).
Appendix Trademark VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries. Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries. Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of Apple Inc.
TCO Congratulations! ThedisplayyouhavejustpurchasedcarriestheTCO’03Displayslabel.This meansthatyourdisplayisdesigned,manufacturedandtestedaccordingto someofthestrictestqualityandenvironmentalrequirementsintheworld. Thismakesforahighperformanceproduct,designedwiththeuserinfocus thatalsominimizestheImpactonournaturalenvironment.
FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC. 5710WarlandDrive,Cypress,CA90630 Phone:(562)431-5011 declare that the product Tradename:EIZO Model:FlexScanSX2762W is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referredtoasthe“Distributors”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchasedtheproductspecifiedinthisdocument(hereinafterreferredtoasthe“Product”)from
BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„EIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der dasindiesemDokumentvorgegebeneProdukt(imWeiterenals„Produkt“bezeichnet)vonEIZOodereinemVertrieb erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenals„Garantie“bezeichnet),dass EIZO und der Vertrieb nach
GARANTIE LIMITÉE EIZONANAOCORPORATION(ci-aprèsdénommé«EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés «Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée«Garantie »),garantissentàl’acheteurinitial(ci-aprèsdénommé«Acheteur initial »)duproduitspécifiédanslaprésente(ci-après dénommé«Produit »)achetéauprèsd’EIZOoudeDistributeursagréésEIZO,queEIZOetsesDistributeursauront pouroptionderépareroure
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los “Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“Garantía”), garantizanalcompradororiginal(enlosucesivoel“Comprador original”)quecompróelproductoespecificadoeneste documento(enlosucesivoel“Producto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio criterio,repararán
GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“EIZO”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“Distributori”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprungligeköparen(nedankalladden“Ursprunglige köparen”)somköptedenidokumentetspecificeradeprodukten (nedankallad“Produkten”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottfinnandekostnadsfritt antingenreparer
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς, σύμφωναμετηδιακριτήευχέρειάτους,είτε
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный в этом документе (называемый в дальнейшем “Продукт”), что E
有限责任保证书 EIZONANAO 有限公司（以下简称 EIZO ）和 EIZO 授权的经销商（以下简称 经销商 ），接受并依照本有限责任保证书 （以下简称 保证书 ）之条款，向从 EIZO 和经销商购买本文中所规定产品（以下简称 产品 ）的原买方（以下称 原买方 ） 提供保证 ：在保证期内（规定如下），如果原买方发现按本产品所附使用说明书（以下简称 用户手册 ）所述方式正常使 用本产品过程中，本产品出现故障或损坏，EIZO 和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为 (i) 自本产品购买之日起的五 (5) 年期间或限定为到达（ii）使用本产品 3万小时的期限 ， （以下简称 保证期限 ） 但本产品的液晶显示屏（LCD）的保证期限定为自本产品购买之日起的三 (3) 年期间。EIZO和经销商将不向原买方或任何 第三方承担本保证书所规定之外的与本产品有关的任何责任或义务。 本产品的任何部件停产七 (7) 年后，EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时，EIZO 与经销商将使 用符合我方质量控制标准的替换零件。 本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定
China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) Appendix
4th Edition-March, 2012 Copyright © 2011-2012 EIZO NANAO CORPORATION All rights reserved. 03V23433D1 (U.
