User`s manual

27
Chapter3SettingMonitor
●
To connect DVI (Simple display of HDMI signal from digital camera)
An HDMI signal from a digital camera can be simply displayed by means of connecting this product and the
digital camera using a DVI-HDMI converter cable.
Attention
• For displaying the PC signal, “Single Link” or “Dual Link” should be set.
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Signal Selection” from “Optional Settings”, and press .
4. Select “DVI” with
or , and press .
5. Select “Signal Format” with
or , and press .
6. Select “HD Video” with
or , and press .
7. Press
twice.
8. Select “Finish” with
or .
9. Press
.
The “Optional Settings” menu is closed.
●
To connect DisplayPort / Mini DisplayPort
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Signal Selection” from “Optional Settings”, and press .
4. Select “DisplayPort” with
or , and press .
5. Select “Signal Bandwidth” with
or , and press .
Use or to select or just conrm the signal bandwidth setting for the frequency that corresponds to your graphics
board.
Setting
Horizontal scan frequency
(kHz)
Vertical scan frequency (Hz)
Normal 26to89 59to61
Wide 26to89 23.75to63
6. Press .
7. Press
twice.
8. Select “Finish” with
or .
9. Press
.
The “Optional Settings” menu is closed.