User`s manual

30
Chapter4PowerSavingFunctions
4-2. Setting the power saving mode when a person
leaves the monitor “EcoView Sense”
The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1”
to “Level-4” of the EcoView Sense function. When a person moves away from the monitor, it shifts to the
power saving mode automatically and does not display the images on the screen to reduce the power
consumption. When a person comes near the monitor again, it comes back from the power saving mode and
displays the images. The detection level of the EcoView Sense sensor can be changed according to the
environment of usage.
Note
• At the time of shifting to power saving mode, the message that indicates shifting is displayed.
Attention
• When the orientation of the Adjustment menu is set to “Portrait” or “Power Save” is set to “Off”, the EcoView Sense is
turned off (see “3-3. Setting Orientation “Orientation”” (page 24)).
Procedure
1. Choose “PowerManager” from the Adjustment menu, and press
.
2. Choose “EcoView Sense” from “PowerManager”, and press
.
3. Select “Off” and any of “Level-1”, “Level-2”, “Level-3”, or “Level-4” (sensor detection level) with or .
Level Detection Area Details
Level-1 120cm(47.2inch)orless Iftheuserleavesthedetectionarea,themonitorshifts
tothepowersavingmode.Stillobjectsinthedetection
areawillbeinterpretedaspresentuser.Thissettingis
recommendedifthemonitorfrequentlyshiftstothepower
saving,eventhoughauserisinfrontofthescreen.
Level-2 90cm(35.4inch)orless
Level-3 Automaticsetting(120cm[47.2
inch]orless)
Thedetectionareaisdenedautomaticallybytheuser’s
movement.Iftheuserleavesthisarea,themonitorshifts
tothepowersavingmode.Stillobjectsinthedetection
areawillbeignored.
Level-4 Automaticsetting(90cm[35.4
inch]orless)
4. Press to exit.