User`s manual

39
Chapter6Reference
●
To switch among input signals
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
Note
• You can skip a specic input signal. For more information, see“3-9. To Disable Input Signal “Input Skip”” (page 28).
●
To set input signal selection “Input Selection”
Setting Function
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalwith
.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Selection” from “Tools”, and press
.
3. Select “Auto” or “Manual” with
or .
4. Press
to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in
the power saving mode.