User`s manual

8
Chapter1Introduction
Note
This monitor supports the portrait display. This function allows you to change the orientation of the Adjustment
menu when using the monitor screen in vertical display position (see “3-3. Setting Orientation “Orientation”” (page 24)).
For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When
placing the monitor in a “Portrait” position, settings of your graphics board need to be changed. Refer to the User’s
Manual of the graphics board for details.
1-2. Controls and Functions
Adjustmentmenu
*1
15
16
1 2 3 4 5 6 7 8 9
17
1011 12 1314
1. EcoView Sense sensor
Detectsthemovementofapersoninfrontofthemonitor.EcoViewSensefunction(page30).
2. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction(page31).
3.
button Switchesinputsignalsfordisplay(page39).
4.
button ChangesFineContrastmode(page15).
5.
button Cancelsthesetting/adjustmentandexitstheAdjustmentmenu.
6.
button
• Choosesandincreases/decreasesadjustmentsettingsforadvancedadjustment
usingtheAdjustmentmenu.
• DisplaystheBrightnessmenu(page17).
7.
button
DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,andsaves
valuesadjusted(page9).
8.
button Turnsthepoweronoroff.
9. Power indicator
Indicatesthemonitorsoperationstatus.
Blue: Operating
Orange: Powersavingmode
OFF: Mainpower/Poweroff
10. Main power switch Turnsthemainpoweronoroff.
11. Power connector Connectsthepowercord.
12. Input signal connector
Left:DVI-Dconnector/Center:DisplayPortconnector/Right:MiniDisplayPort
connector
13. USB port (Up)
ConnectstheUSBcabletousethesoftwarethatneedsUSBconnection,ortouseUSB
hubfunction(page40).
14. USB port (Down) ConnectsaperipheralUSBdevice.
15. Stand
*2
Usedtoadjusttheheightandangleofthemonitorscreen.
16. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
17. Cable holder Coversthemonitorcables.
*1
See“1-4.BasicOperationsandFunctions”(page9)forhowtouse.
*2
Anoptionalarm(oranoptionalstand)canbeattachedbyremovingthestand(see6-1.HowtoAttachtheOptional
Arm”(page37)).