User`s manual

14
Chapter 2 Settings and Adjustments
2-9 Setting Orientation
●
To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Orientation> from the <Menu Settings> menu, and press .
The <Orientation> menu appears.
(4) Select “Portrait” with or , and press .
The orientation setting is completed.
(5) Turn the monitor screen 90° in clockwise direction.
2-10 Viewing Information/Setting Language
●
To check settings, usage time, etc. [Information]
This function allows you to check settings, model name, serial number, display
mode (see page 6), and usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press to check settings, etc.
●
To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/SimpliedChinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with / / / , and press .
The language setting is completed.
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
Attention
• The information is displayed in the
following order; settings, SIGNAL1,
SIGNAL2 display mode (see
page 6)
and model name, serial No, and usage
time of the monitor.
NOTE
• If you use the monitor with “Portrait”
position,thesettingmayberequired
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.
Attention
• Be sure to turn the monitor screen
after pulling up the screen to the
uppermost position of the stand and
setting the screen tilted upward.