User`s manual

17
Chapter 3 Connecting Cables
3-1 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
●
Required System Environment
(1) APCequippedwithaUSBportoranotherUSBhubconnectedtoaUSB
compatible PC
(2) Windows2000/XP/VistaorMacOS9.2.2andMacOSX10.2orlater
(3) EIZO USB cable (MD-C93)
●
Connection Procedure (Setup of USB Function)
(1) ConnectthemonitorrsttoaPCusingthesignalcable,andrunthePC.
(2) Connect the supplied USB cable between the downstream USB port of a
USB compatible PC (or another USB hub) and the monitor’s upstream USB
port.
(3) WhentheUSBfunctionsetupiscompleted,themonitorfunctionsasaUSB
hub allowing connection to various peripheral USB devices through its
downstream USB ports.
Upstream
Downstream
The USB function is set up automatically upon connection of the USB cable.
Chapter 3 Connecting Cables
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the monitor is in the power saving
mode, or if the monitor is connected
to the power outlet with the monitor
turned off, all the devices connected
to the USB ports (upstream and
downstream) work. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.