User`s manual

23
Chapter 5 Reference
Chapter5 Reference
5-1 AttachinganArm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor.
[Attaching]
1
 LaytheLCDmonitoronasoftclothspreadoveronastable
surfacewiththepanelsurfacefacingdown.
2
 Removethestand.(Prepareascrewdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3
 Attachthemonitortothearmorstand.
Secure the monitor to the arm or stand using the screws specied in the
user’s manual of the arm or stand.
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, conrm the following in
advance and select one conforming to
the VESA standard. Use M4 × 12 mm
screws supplied with the monitor.
– Clearance between the screw holes:
100 mm × 100 mm
– Thickness of plate: 2.6 mm
– Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• When using an arm or stand, attach it
to meet the following tilt angles of the
monitor.
– Up 60 degrees, down 45 degrees
(horizontal display)
• Connect the cables after attaching an
arm or a stand.