Important Please read PRECAUTIONS, this User’s Manual, and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC to using the monitor. • The latest User’s Manual is available for download from our web site: http://www.eizo.
Location of Caution Statement Ex. LaidBack Stand [Symbol on the Unit] Symbol This symbol indicates Power Button Press to turn the monitor’s power on or off. Alternating current Alerting electrical hazard Caution Refer to SAFETY SYMBOLS section in PRECAUTIONS. This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications.
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to the dedicated usages such as operation of terminal equipment. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. • Do not allow liquid to enter the clearance between the panel and the panel frame. Note • The optional ScreenCleaner is recommended for cleaning the panel surface.
CONTENTS Cover....................................................................... 1 Notice for this monitor............................................. 3 CONTENTS.............................................................. 5 Chapter 1 1-1. 1-2. Introduction........................................ 6 4-1. Power Saving Mode..................................... 24 4-2. Setting Power Indicator ...................................................... 24 4-3.
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 17” LCD • Applicable to the resolution of 1280 × 1024. • Standard touch panel -- Infrared optical imaging system Supports the Windows Touch function (multi-touch) of Microsoft Windows 7. * This product supports up to two simultaneous touches (multi-touch support). • Uses high-contrast panel (1500:1). Enables the display of sharp images.
1-2. Controls and Functions Ex. LaidBack Stand 10 11 12 Adjustment menu (ScreenManager*1) 14 15 6 13 9 1 2 3 1. Auto EcoView sensor 2. button 3. button button 4. button 5. 6. 7. button button 4 5 7 8 Detects ambient brightness. Auto EcoView function (page 25). Displays the setting menu of the power saving function (Auto EcoView and EcoView Index) (page 25). Displays the Volume adjustment menu (page 21). Switches input signals for display (page 26).
●●Stand installation (LaidBack Stand) This product can be adjusted to angles of 15°, 25°, 35°, 45°, 55°, and 65°. Min. 15º Max. 65º CAUTION Do not use the stand in its packaged state. The stand is folded when it is packaged for shipment. Using it in this state will make the monitor unstable, potentially resulting in it falling over and causing injuries or equipment damage. When using the stand, unfold it to at least 15° and set it up correctly.
1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ●●Disk contents and software overview The disk includes adjustment software, touch panel software, and user’s manuals. Refer to Readme.txt file on the disk for software startup procedures or file access procedures. Item Overview A Readme.
1-4. Basic Operations and Functions ●●Basic Adjustment menu operations 1. Displaying Adjustment Menu 1. Press . The adjustment menu appears. At digital signal input 2. Adjusting/Setting 1. Choose a menu to adjust/set with or , and then press . The Sub menu appears. 2. Choose an item to adjust/set with or , and then press . The adjustment/ setting menu appears. 3. Adjust/set the selected item with or , and then press 3. Exiting . 1. Choose from the Sub menu and press .
●●Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main menu Auto Adjustment*1 Setting Screen Range Screen Reference “2-3. Displaying Screen Correctly” (page 14) Clock*1 Phase*1 Hor.Position*1 Ver.Position*1 Smoothing Return Color *2 Brightness “2-4.
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input (D-Sub) Resolution Applicable Signals 640 × 480 720 × 400 800 × 600 1024 × 768 1152 × 864 1280 × 960 1280 × 1024* VGA, VESA VGA TEXT VESA VESA VESA VESA VESA Vertical Scan Frequency Dot Clock up to 75 Hz 70 Hz up to 75 Hz up to 75 Hz 75 Hz 60 Hz up to 75 Hz 135 MHz (Max.
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog box, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the [OK] button. 6.
2-3. Displaying Screen Correctly ●●Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 17). When performing more advanced adjustment, see “2-4. Adjusting Color” (page 18) and subsequent pages. ●●Analog Signal Input Attention • The monitor will take about 30 minutes before its internal electric components stabilize.
2. Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file. 3. Perform the auto adjustment again with the analog screen adjustment pattern displayed. ●●To adjust flickering, screen position, and screen size automatically Procedure 1.
●●To remove flickering or blurring Procedure 1. Choose from the menu, and press . The menu appears. 2. Adjust the phase with 3. Press or to minimize flickering or blurring. to exit the adjustment. When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars ”. (Clock → Phase → Position) Attention • Flickering or blurring may not be eliminated depending on your PC or graphics board. ●●To correct the screen position
5. Adjusting color gradation. ●●To adjust color gradation automatically Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. Choose from the Adjustment menu, and press . . 3. Choose from the menu, and press The menu appears. 4. Select with or , and press .
2-4. Adjusting Color ●●To select the display mode (FineContrast mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose Custom Select this to define a desired set of parameter settings. EyeCare Allows the brightness to be set lower than possible with other modes. sRGB Suitable for color matching with sRGB compatible peripherals. Text Suitable for displaying texts for word processing or spreadsheets. Procedure . 1.
●●To adjust brightness The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Adjustable range 0 to 100% Procedure 1. Choose from the Adjustment menu, and press . . 2. Choose from the menu, and press The menu appears. 3. Use or for adjustment. to exit the adjustment. 4. Press Note • Alternatively, you can use the or button for adjustment.
●●To adjust color temperature Color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame temperature. A gain preset value is set for each color temperature setting value. Adjustable range Off, 5000K, 6500K, 9300K Procedure . 1.
Chapter 3 Setting Monitor 3-1. Adjusting Volume This function allows you to adjust the volume. Adjustable range 0 to 20 Procedure . 1. Press The volume adjustment menu appears. 2. Use or for adjustment. to exit the adjustment. 3. Press 3-2. Changing Adjustment Menu Display Position
3-4. Setting the EIZO Logo Display You can choose to display or not to display the EIZO logo, which appears when you turn on the monitor. Procedure 1. Press to turn off the monitor. 2. Press holding down to turn on the monitor. The EIZO logo display setting is toggled by performing the operation in steps 1 and 2. 3-5. Setting Language This function allows you to select a language for the Adjustment menu and messages.
3-7. Resetting the Monitor to the Default Settings There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full Reset for resetting all settings to the defaults. Attention • After resetting, you cannot undo the operation. Note • Regarding the default setting, see “Main Default Settings” (page 35). ●●To reset the color adjustments This function only resets the color adjustments for the currently selected mode to the default settings.
Chapter 4 Power Saving Functions 4-1. Power Saving Mode When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention • Unplugging the power cord completely shuts off power supply to the monitor. • Power consumption varies even when the stereo mini jack cable is connected. Power Saving System Analog Signal Input This monitor complies with the VESA DPM standard.
4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView” The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. Procedure 1. Press . The “EcoView” menu appears. 2. Select “On” or “Off” with or . to exit the adjustment. 3.
Chapter 5 Connecting Cables 5-1. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display. Attention • It is assumed the touch panel monitor will be used with one computer. When the monitor is to be connected to multiple computers, connect a USB cable (MD-C93) to the computer used for touch operation (one unit only). • Do not use dual link cables.
●●To set input signal selection Setting Function Auto The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Manual The monitor detects only the PC’s signals currently displaying automatically. Select an active input signal with .
Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No picture Problem 1. No picture • Power indicator does not light. • Check whether the power cord is connected properly. • Press . • Power indicator is lighting blue. • Increase , , and/or in the Adjustment menu (see “To perform advanced adjustments” (page 18)). • Power indicator is lighting orange. • Switch the input signal with .
Imaging problems (for both digital and analog) Problem Possible cause and remedy 3. The screen is too bright or too dark. • Use or in the Adjustment menu to adjust it. (The LCD monitor backlight has a limited life span. When the screen becomes dark or begins to flicker, contact your local dealer.) • Turn on the Auto EcoView function. The monitor detects the environmental brightness to adjust the screen brightness automatically. 4. Characters are blurred.
Other problems Problem 30 Possible cause and remedy 13. The adjustment menu does not appear. • Check whether the operation lock function works (see “3-3. Locking Buttons” (page 21)). 14. All control buttons are disabled. • Check whether the operation lock function works (see “3-3. Locking Buttons” (page 21)). 15. The auto adjustment function does not work. • This function does not work during digital signal input.
Touch panel problems Problem Possible cause and remedy 17. Touch operation is disabled. • The touch panel driver must be installed when this product is used as a touch panel monitor. Check whether the driver has been installed correctly in accordance with the Installation Guide on the supplied CD-ROM. • Check that the monitor and PC are connected with a USB cable. 18. No sound is heard when the panel is touched. • This product does not support to output sound when the screen is touched. 19.
Chapter 7 Reference 7-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
3. Attach the arm or stand to the monitor. Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or stand. 7-2. Displaying Monitor Information This function allows you to display the input signal status, current resolution and model name. Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies Information 2/3: DDC/CI Enable/Disable status Information 3/3: Model name, serial number, and usage time Procedure 1.
7-3. Specifications LCD panel Size 17.0-inch (430 mm) TFT color LCD Viewing angles Viewing angles: Horizontal 178°, vertical 178° (CR≥10) Dot pitch 0.264 mm Response time Black-white-black: Approx. 25 ms Horizontal scan Analog frequency Digital Vertical scan frequency 24.8-80 kHz 31-64 kHz Analog 50-75 Hz (non-interlace) Digital 59-61Hz (non-interlace) (VGA TEXT: 69-71Hz) Resolution 1280 dots × 1024 lines Max. dot clock 135.0 MHz Max. display color Approx. 16.
Movable range LaidBack Stand Tilt: 15°/25°/35°/45°/55°/65° Tilt stand Tilt: 30° Up, 0° Down Classification of Equipment Type of protection against electric shock : Class I EMC class : EN60601-1-2:2007 Group 1 Class B Classification of medical device (MDD 93/42/EEC) : Class I Mode of operation : Continuous IP Class : IPX0 Environmental conditions Temperature Operating: 0°C to 35°C (32°F to 95°F) Transportation/Storage: -20°C to 60°C (-4°F to 140°F) Humidity Operating: 20% to 80% R.H.
Outside Dimensions • LaidBack Stand Unit: mm (inch) 103.7 (4.1) 103.7 (4.1) 392(15.4) 344.6(13.6) 23.7 (0.93) 171(6.7) 359.2(14.1) 340.2(13.4) 198.8(7.8) 365.1(14.4) 15° 65° 52.8 (2.08) 132.3(5.2) 40 136.2(5.4) (1.57) 190.7(7.5) 19.4 (0.76) 325.6(12.8) 339.8(13.4) 8.2(0.32) 20.2 (0.8) 9.6 (0.38) 52.1 (2.05) 83(3.27) 276.9(10.9) 357(14.1) 366.6(14.4) 20(0.79) 125(4.9) 28 (1.1) 23.7 (0.93) 120.4(4.7) 66.5(2.62) 39.4 (1.55) 45 (1.77) 136(5.4) 200(7.9) • Tilt stand Unit: mm (inch) 66.
7-4. Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the setting information, etc.
Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 × 1024, all pixels are illuminated as a full screen (1:1). sRGB (Standard RGB) International standard for color reproduction and color space among peripheral devices (such as monitors, printers, digital cameras, scanners).
7-5. Preset Timing The following table shows factory preset analog signal timing: Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment.
Appendix Trademark VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries. Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries. Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of Apple Inc.
Medical Standard • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement. • Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided. • This is a monitor intended for use in a medical imaging system. It does not support the display of mammography images for diagnosis.
FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC. 5710WarlandDrive,Cypress,CA90630 Phone:(562)431-5011 declare that the product Tradename:EIZO Model:FlexScanT1751 is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
EMC Information Essential performance of FlexScan T1751 is to display images and operate functions normally. CAUTION The FlexScan T1751 requires special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use any cables other than the cables that provided or specified by us. Using other cables may cause the increase of emission or decrease of immunity.
Guidance and manufacturer’s declaration - electromagnetic immunity The FlexScan T1751 is intended for use in the electromagnetic environment specified below. The customer or the user of the FlexScan T1751 should assure that it is used in such an environment. Immunity test IEC/EN60601 test level Compliance level Electromagnetic environment - guidance Conducted RF IEC/EN61000-4-6 3Vrms 150kHz to 80MHz 3Vrms Radiated RF IEC/EN61000-4-3 3V/m 80MHz to 2.
Recommended separation distances between portable and mobile RF communications equipment and the FlexScan T1751 The FlexScan T1751 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referredtoasthe“Distributors”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchasedtheproductspecifiedinthisdocument(hereinafterreferredtoasthe“Product”)from
BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„EIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der dasindiesemDokumentvorgegebeneProdukt(imWeiterenals„Produkt“bezeichnet)vonEIZOodereinemVertrieb erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenals„Garantie“bezeichnet),dass EIZO und der Vertrieb nach
GARANTIE LIMITÉE EIZONANAOCORPORATION(ci-aprèsdénommé«EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés «Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée«Garantie »),garantissentàl’acheteurinitial(ci-aprèsdénommé«Acheteur initial »)duproduitspécifiédanslaprésente(ci-après dénommé«Produit »)achetéauprèsd’EIZOoudeDistributeursagréésEIZO,queEIZOetsesDistributeursauront pouroptionderépareroure
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los “Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“Garantía”), garantizanalcompradororiginal(enlosucesivoel“Comprador original”)quecompróelproductoespecificadoeneste documento(enlosucesivoel“Producto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio criterio,repararán
GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“EIZO”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“Distributori”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprungligeköparen(nedankalladden“Ursprunglige köparen”)somköptedenidokumentetspecificeradeprodukten (nedankallad“Produkten”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottfinnandekostnadsfritt antingenreparer
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς, σύμφωναμετηδιακριτήευχέρειάτους,είτε
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный в этом документе (называемый в дальнейшем “Продукт”), что E
有限责任保证书 EIZONANAO 有限公司（以下简称 EIZO ）和 EIZO 授权的经销商（以下简称 经销商 ），接受并依照本有限责任保证书 （以下简称 保证书 ）之条款，向从 EIZO 和经销商购买本文中所规定产品（以下简称 产品 ）的原买方（以下称 原买 方 ）提供保证 ：在保证期内（规定如下），如果原买方发现按本产品所附使用说明书（以下简称 用户手册 ）所述方式正 常使用本产品过程中，本产品出现故障或损坏，EIZO 和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为本产品自购买本产品之日起的三（3）年（以下简称 保证期限 ）。EIZO 和经销商将不向原买方或任何第 三方承担本保证书所规定之外的与本产品有关任何责任或义务。 本产品的任何部件停产七 (7) 年后，EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时，EIZO 与经销商将使 用符合我方质量控制标准的替换零件。 本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定原买方的任何法律权利。 无论本保证书的任何其他条款如何规定，对于任何下列情况之一，EIZO 和经销商将不承担本保证书规定责任 ： (a) 由于运输损害
China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) 56 Appe
4th Edition-March, 2012 Copyright © 2010-2012 EIZO NANAO CORPORATION All rights reserved. 03V23388D1 (U.
