Important Please read PRECAUTIONS, this User’s Manual, and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC or external equipment to using the monitor. • The latest User’s Manual is available for download from our Web site: http://www.eizo.
Location of Caution Statement Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region of purchase. Copyright© 2010 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or panel. • Do not soak liquid into the clearance between the panel and the panel frame. ●●Panel • Clean the panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by using the provided cleaning cloth, or moistening part of a cloth with water to enhance its cleaning power.
CONTENTS Cover....................................................................... 1 Notice for this monitor............................................. 3 CONTENTS.............................................................. 5 Chapter 1 1-1. 1-2. Introduction........................................ 7 Features.......................................................... 7 Controls and Functions................................ 8 ●● ●● Stand installation..............................................
Appendix............................................................... 49 Trademark................................................................ 49 ENERGY STAR......................................................... 49 TCO........................................................................... 50 FCC Declaration of Conformity............................. 50 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor.......................51 LIMITED WARRANTY......................................
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 23″ wide format LCD • Applicable to the resolution of 1920 × 1080. • Standard touch panel -- Infrared optical imaging system Supports the Windows Touch function (multi-touch) of Microsoft Windows 7. * This product supports up to two simultaneous touches (multi-touch support). • Uses high-contrast panel (3000:1). Enables the display of sharp images.
1-2. Controls and Functions Adjustment menu (ScreenManager*1) 1. Auto EcoView sensor 2. button 3. button button 4. 5. 6. button button Detects ambient brightness. Auto EcoView function (page 33). Displays the setting menu of the power saving function (Auto EcoView and EcoView Index) (page 33). Switches input signals for display (page 35). Displays the Adjustment menu, determines an item on the menu screen, and saves values adjusted (page 11).
●●Stand installation This product can be adjusted to angles of 15°, 25°, 35°, 45°, 55°, and 65°. Min. 15º Max. 65º CAUTION Do not use the stand in its packaged state. The stand is folded when it is packaged for shipment. Using it in this state will make the monitor unstable, potentially resulting in it falling over and causing injuries or equipment damage. When using the stand, unfold it to at least 15° and set it up correctly.
1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ●●Disk contents and software overview The disk includes adjustment software, touch panel software, and user’s manuals. Refer to Readme.txt file on the disk for software startup procedures or file access procedures. Item Overview A Readme.
1-4. Basic Operations and Functions ●●Basic Adjustment menu operations 1. Displaying Adjustment Menu 1. Press . The adjustment menu appears. 2. Adjusting/Setting 1. Choose a menu to adjust/set with , , , , and then press . The Sub menu appears. 2. Choose an item to adjust/set with appears. , , , , and then press . The adjustment/ setting menu 3. Adjust/set the selected item with , , , , and then press 3. Exiting . 1. Choose from the Sub menu and press . The Main menu appears. 2.
●●Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main menu Auto Adjustment*1 Setting Range Screen Reference “2-3. Displaying Screen Correctly” (page 15) Screen Clock*1 Phase*1 Position*1 Smoothing Return Color *2 “2-4. Adjusting Color” (page 19) Brightness Black Level Contrast Temperature Gamma Saturation Hue Gain Power Resolution Overdrive Reset Sound “3-1. Adjusting Volume ” (page 27) “3-2.
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions/Formats The monitor supports the following resolutions and signal format. Analog Input (D-Sub) Resolution Applicable Signals 640 × 480 720 × 400 800 × 600 1024 × 768 1280 × 720 1280 × 960 1280 × 1024 1680 × 1050 1920 × 1080* VGA, VESA, CEA-861 VGA TEXT VESA VESA CEA-861 VESA VESA VESA CVT, VESA CVT RB CEA-861 Vertical Scan Frequency Dot Clock up to 75 Hz 70 Hz up to 75 Hz up to 75 Hz 60 Hz 60 Hz up to 75 Hz 60 Hz 60 Hz 148.5 MHz (Max.
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog box, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the [OK] button. 6.
2-3. Displaying Screen Correctly ●●Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 18). When performing more advanced adjustment, see “2-4. Adjusting Color” (page 19) and subsequent pages. ●●Analog Signal Input Attention • The monitor will take about 30 minutes before its internal electric components stabilize.
2. Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file. 3. Perform the auto adjustment again with the analog screen adjustment pattern displayed. ●●To adjust flickering, screen position, and screen size automatically Procedure 1.
●●To remove flickering or blurring Procedure 1. Choose from the menu, and press . The menu appears. 2. Adjust the phase with 3. Press or to minimize flickering or blurring. to exit the adjustment. When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars ”. (Clock → Phase → Position) Attention • Flickering or blurring may not be eliminated depending on your PC or graphics board.
5. Adjusting color gradation. ●●To adjust color gradation automatically Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. Choose from the Adjustment menu, and press . . 3. Choose from the menu, and press The menu appears. 4. Select with or , and press .
2-4. Adjusting Color ●●To select the display mode (FineContrast mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Select one of these user modes to define a desired set of parameter settings. User2 sRGB Suitable for color matching with sRGB compatible peripherals. Paper Produces a printed paper effect by decreasing contrast and color temperature. Game Suitable for displaying game images.
●●Adjustable settings in each mode The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.) For instructions on how to adjust or set each function, refer to subsequent pages.
●●To adjust black level You can adjust the black level of images. Adjustable range -50 to 50 Procedure 1. Choose from the Adjustment menu, and press . . 2. Choose from the menu, and press The menu appears. 3. Use or for adjustment. to exit the adjustment. 4. Press Note • After completing black level adjustment, readjust the contrast as appropriate.
●●To adjust color temperature Color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame temperature. A gain preset value is set for each color temperature setting value.
●●To adjust the color saturation This function allows you to adjust color saturation. Adjustable range -128 to 127 Procedure . 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press The menu appears. 3. Use or for adjustment. to exit the adjustment. 4. Press Attention • Using this function may make some color gradations unavailable for display. Note • The minimum value (-128) changes the screen to monochrome.
●●To adjust gain The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain. Adjustable range 0 to 100% Procedure . 1. Choose from the Adjustment menu, and press 2. Choose from the menu, and press . The menu appears. 3. Adjust gain with or for each of red, green, and blue. to exit the adjustment. 4. Press Attention • Using this function may make some color gradations unavailable for display.
●●To set overdrive intensity This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image lags by setting it to “Enhanced” when displaying animated images. Adjustable range Enhanced, Standard, Off Procedure 1. Choose from the Adjustment menu, and press 2. Choose from the menu, and press . . The menu appears. 3. Use 4. Press or for adjustment. to exit the adjustment.
2-5. Changing the Screen Size ●●To change screen size If a resolution other than recommended is used, the image displayed in full screen automatically. You can change the screen size by using from menu. Setting Function Auto The monitor automatically changes the screen size according to the aspect ratio and resolution information from the external device. This can be set only for HDMI (SD Signal) input. Full Screen Displays an image in full screen.
Chapter 3 Setting Monitor 3-1. Adjusting Volume This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure . 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press The volume adjustment menu appears. 3. Use or 4. Press for adjustment. to exit the adjustment. Note • Alternatively, you can use or for adjustment (see “1-2. Controls and Functions” (page 8)).
3-3. Setting Adjustment Menu Display ●●Changing Adjustment Menu Display Size
●●Changing Transparency of Adjustment Menu Display You can set the transparency of the Adjustment menu. Procedure 1. Choose from the Adjustment menu, and press . . 2. Choose from the menu, and press . 3. Choose from the menu, and press The menu appears. 4. Use or for adjustment. to exit the adjustment. 5. Press 3-4.
3-7. Enabling/Disabling DDC/CI communication This function allows you to enable/disable the DDC/CI communication (see “7-4. Glossary” (page 46)). Procedure 1. Press to turn off the monitor. 2. Press holding down to turn on the monitor. You can toggle between Enable and Disable by performing steps 1 and 2. Note • You can check the DDC/CI setting in the menu. • HDMI input does not support DDC/CI communication. 3-8.
Chapter 4 Power Saving Functions 4-1. Setting Power Saving ●●Monitor This function allows you to specify whether to set the monitor into the power saving mode, depending on the state of an external device connected to it. When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention • Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
When the external device connected is not a PC Ext. Device Monitor Power Indicator Power On Operating Blue Power Off Power saving mode Orange Exiting the power saving mode If the monitor receives input, it automatically exits the power saving mode and returns to the normal display mode. ●●Audio Output This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode. Procedure 1. Choose from the Adjustment menu, and press . . 2.
4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView” The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. Procedure 1. Press . The “EcoView” menu appears. 2. Choose “Auto EcoView” with 3. Select “On” or “Off” with or .
Chapter 5 Connecting Cables 5-1. Connecting Multiple External Devices The product has multiple connections to external devices and allows you to switch to one of the connections for display. Attention • It is assumed the touch panel monitor will be used with one computer. When the monitor is to be connected to multiple computers, connect a USB cable (MD-C93) to the computer used for touch operation (one unit only). • Do not use dual link cables.
●●To switch among input signals The input signal switches each time is pressed. When the signal is switched, the active input port name appears at the top right corner of the screen.
Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No picture Problem 1. No picture • Power indicator does not light. • Check whether the power cord is connected properly. • Turn off the main power, and then turn it on again a few minutes later. • Turn the main power switch on. • Press . • Power indicator is lighting blue.
Imaging problems (for both digital and analog) Problem Possible cause and remedy 3. The screen is too bright or too dark. • Use or in the Adjustment menu to adjust it. (The LCD monitor backlight has a limited life span. When the screen becomes dark or begins to flicker, contact your local dealer.) • Turn on the Auto EcoView function. The monitor detects the environmental brightness to adjust the screen brightness automatically. 4. Characters are blurred.
Imaging problems (for analog only) Problem 38 Possible cause and remedy 12. Display position is incorrect. • Use in the Adjustment menu to correct the image position (see “To correct the screen position ” (page 17)). • If the problem persists, use the graphics board’s utility if available to change the display position. 13. Vertical bars appear on the screen or a part of the image is flickering.
Other problems Problem Possible cause and remedy 15. The icon on the Adjustment menu cannot be selected. • You cannot choose the smoothing icon when the screen is displayed in the following resolutions or settings. --The resolution is 1920 × 1080 --“Normal” is selected from in the Adjustment menu. 16. The adjustment menu does not appear. • Check whether the operation lock function works (see “3-4. Locking Buttons” (page 29)). 17. No mode name is displayed.
Touch panel problems Problem Possible cause and remedy 21. Touch operation is disabled. • The touch panel driver must be installed when this product is used as a touch panel monitor. Check whether the driver has been installed correctly in accordance with the Installation Guide on the supplied CD-ROM. • Check that the monitor and PC are connected with a USB cable. 22. No sound is heard when the panel is touched.
Chapter 7 Reference 7-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
3. Attach the arm or stand to the monitor. Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or stand. 7-2. Displaying Monitor Information This function allows you to display the input signal status, current resolution and model name. Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies Information 2/3: DDC/CI Enable/Disable status Information 3/3: Model name, serial number, and usage time Procedure 1.
7-3. Specifications LCD panel Size 23.0-inch (580 mm) TFT color LCD Viewing angles Viewing angles: Horizontal 178°, vertical 178° (CR≥10) Dot pitch 0.2655 mm Response time Black-white-black: Approx. 25 ms Gray-to-gray: Approx.
Dimensions (width) × (height) × (depth) Main unit Mass Main unit 557 mm (21.9 inch) × 204.5 - 375.5 mm (8.1 - 14.8 inch) × 194 - 367 mm (7.6 - 14.4 inch) Main unit (without stand) 557 mm (21.9 inch) × 376 mm (14.8 inch) × 68 mm (2.68 inch) Approx. 7.6 kg (16.8 lbs) Main unit (without stand) Approx. 6.8 kg (15.
Accessories For the latest information about the accessories, refer to our web site. http://www.eizo.
7-4. Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. Color Space Color space is a method to specify and express the color. There are YUV and RGB, etc.
HDMI (High-Definition Multimedia Interface) HDMI is a digital interface standard, developed for consumer electrical appliance or AV device. This standard is issued on the basis of the DVI standard which is one of an interface specification for the connection between a PC and a monitor. The projected image, sound and control signal without compressed enable to be transmitted with one cable.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) VESA specifications achieve increased energy efficiency for computer monitors. This involves standardization of signals sent from the computer (graphics board). DPMS defines the status of signals transmitted between the computer and monitor. 7-5.
Appendix Trademark VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries. Windows, Windows Vista, Windows Media, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries. Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of Apple Inc.
TCO This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referredtoasthe“Distributors”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchasedtheproductspecifiedinthisdocument(hereinafterreferredtoasthe“Product”)from
BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„EIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der dasindiesemDokumentvorgegebeneProdukt(imWeiterenals„Produkt“bezeichnet)vonEIZOodereinemVertrieb erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenals„Garantie“bezeichnet),dass EIZO und der Vertrieb nach
GARANTIE LIMITÉE EIZONANAOCORPORATION(ci-aprèsdénommé«EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés «Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée«Garantie »),garantissentàl’acheteurinitial(ci-aprèsdénommé«Acheteur initial »)duproduitspécifiédanslaprésente(ci-après dénommé«Produit »)achetéauprèsd’EIZOoudeDistributeursagréésEIZO,queEIZOetsesDistributeursauront pouroptionderépareroure
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los “Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“Garantía”), garantizanalcompradororiginal(enlosucesivoel“Comprador original”)quecompróelproductoespecificadoeneste documento(enlosucesivoel“Producto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio criterio,repararán
GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“EIZO”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“Distributori”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprungligeköparen(nedankalladden“Ursprunglige köparen”)somköptedenidokumentetspecificeradeprodukten (nedankallad“Produkten”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottfinnandekostnadsfritt antingenreparer
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς, σύμφωναμετηδιακριτήευχέρειάτους,είτε
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный в этом документе (называемый в дальнейшем “Продукт”), что
有限责任保证书 EIZONANAO 有限公司(以下简称 EIZO )和 EIZO 授权的经销商(以下简称 经销商 ),接受并依照本有限责任保证书 (以下简称 保证书 )之条款,向从 EIZO 和经销商购买本文中所规定产品(以下简称 产品 )的原买方(以下称 原买 方 )提供保证 :在保证期内(规定如下),如果原买方发现按本产品所附使用说明书(以下简称 用户手册 )所述方式正 常使用本产品过程中,本产品出现故障或损坏,EIZO 和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为本产品自购买本产品之日起的三(3)年(以下简称 保证期限 )。EIZO 和经销商将不向原买方或任何第 三方承担本保证书所规定之外的与本产品有关任何责任或义务。 本产品的任何部件停产七 (7) 年后,EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时,EIZO 与经销商将使 用符合我方质量控制标准的替换零件。 本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定原买方的任何法律权利。 无论本保证书的任何其他条款如何规定,对于任何下列情况之一,EIZO 和经销商将不承担本保证书规定责任 : (a) 由于运输损害
China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ :表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × :表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) Appendix