User`s manual
Table Of Contents
- FlexScan T2351W User's Manual
- Cover
- CONTENTS
- Chapter 1 Introduction
- Chapter 2 Adjusting Screens
- 2-1. Compatible Resolutions/Formats
- 2-2. Setting the Resolution
- 2-3. Displaying Screen Correctly
- 2-4. Adjusting Color
- To select the display mode (FineContrast mode)
- To perform advanced adjustments
- Adjustable settings in each mode
- To adjust brightness
- To adjust black level
- To adjust contrast
- To adjust color temperature
- To adjust gamma
- To adjust the color saturation
- To adjust hue
- To adjust gain
- To reduce image blur
- To set overdrive intensity
- 2-5. Changing the Screen Size
- Chapter 3 Setting Monitor
- Chapter 4 Power Saving Functions
- Chapter 5 Connecting Cables
- Chapter 6 Troubleshooting
- Chapter 7 Reference
- Appendix
38
Chapter6Troubleshooting
Imaging problems (for analog only)
Problem Possible cause and remedy
12. Display position is incorrect. • Use<Position>intheAdjustmentmenutocorrectthe
imageposition(see“Tocorrectthescreenposition
<Position>”(page17)).
• Iftheproblempersists,usethegraphicsboard’sutility
ifavailabletochangethedisplayposition.
13. Vertical bars appear on the screen or a
part of the image is ickering.
• Use<Clock>intheAdjustmentmenutoadjustit(see
“Toeliminateverticalbars<Clock>”(page16)).
14. Whole screen is ickering or blurring.
• Use<Phase>intheAdjustmentmenutoadjustit(see
“Toremoveickeringorblurring<Phase>”(page17)).