User’s Manual Touch Panel Color LCD Monitor It shall be assured that the system finally complies with IEC60601-1-1 requirements.
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2003 EIZO NANAO CORPORATION All rights reserved.
English TABLE OF CONTENTS PRECAUTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .......................
English PRECAUTIONS IMPORTANT! x This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. x To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).
English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit can be dangerous. Do not dismantle the cabinet or modify the unit. Dismantling the cabinet or modifying the unit may result in electric shock or burn. Refer all servicing to qualified service personnel.
English WARNING To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Never tug on the cord, doing so may cause damage and could result in fire or electric shock.
English WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.
English CAUTION Do not touch the plug with wet hands. Touching them may result in electric shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodically clean the area around the plug. Buildup of dust, water, or oil on the plug may result in fire. Unplug the unit before cleaning it. Cleaning the unit while it is plugged into a power outlet may result in electric shock.
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features x Dual inputs compliant x DVI (p.37) Digital input (TMDS (p.38)) compliant. x Horizontal scanning frequency: Vertical scanning frequency: Resolution: Analog input 24 - 61 kHz Digital input 31 - 49 kHz Analog input 55 - 75 Hz Digital input 59 - 61 Hz (VGA text: 70 Hz) 0.8 M pixels (1024 dots x 768 lines) x Auto Adjustment compliant x Support to sRGB (p.
English 1-3. Controls & Connectors Front (1) (2) SIG. AUTO ENT. Control Panel SIG. AUTO ENT. (3) (4) (5) (1) (2) (3) (4) (5) (6) (7) (8) *2 10 (7) (8) ScreenManager® Speaker*1 Volume Control Press the Right and Left Buttons. Mute Press the Up or Down Button for a while after pressing the Right or Left Button to display the volume control bar. Press the Right or Left Button to mute off.
English Rear (15) POWER INPUT DVI D-SUB (14) (16) Bottom (9) (9) (10) (11) (12) (13) (14) (15) (16) *3 *4 (10) (11) (12) (13) Power Connector RS-232C port (Mini DIN 6 pin) External line in (stereo mini-jack) DVI-D Connector (SIGNAL 1) D-Sub mini 15 pin Connector (SIGNAL 2) Security Lock Slot*3 4 Holes for Mounting an Arm*4 Stand (Detachable) *4 Allows for connection of a security cable. This lock supports Kensington’s MicroSaver security system.
English 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.37) and frequency) in accordance with the charts below. NOTE x The lower display modes like 640x 480, automatically enlarge to the maximum display mode (1024 x 768), and some lines of the characters may become fuzzy. In this case, use function (p.22) to make the lines clear.
English 2-2. Connecting the signal cable NOTE x Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Digital Signal Input Connecter Analog Signal Input Connecter 3. Power Cord 2. Touch Panel Cable 1.
English 2. Plug the enclosed touch panel cable into the RS-232C port of the monitor. Then, plug the other end of the cable into the COM port of the computer. NOTE x When using the monitor without the touch panel cable, please uninstall the touch panel driver from the computer. Not doing so may cause hang-up of the computer. 3. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet.
English 2-3. Connecting two PCs to the monitor Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the back of the monitor. Selecting the active input The Input Signal Selection Button on the control panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Every time the button is pressed, the input changes.
English 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager Main Menu Control Buttons Left, Down, Up, Right SIG. AUTO SIG. ENT. AUTO ENT. Auto Adjustment Button Enter Button 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Control Buttons and press the Enter Button. The sub menu appears.
English 3-2. Adjustments and Settings The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Screen Sub menu Reference Clock * Phase * Position * Range Adjustment * 4-1. Screen Adjustment (p.20) Smoothing Color Brightness 4-2. Color Adjustment (p.24) Color Mode x Custom Temperature Gamma Saturation Hue Gain Reset x sRGB Sound Volume Control the sound volume.
English 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function x Auto Adjustment Button adjustments and settings in the ScreenManager. Unlocked function x Adjustment of brightness by the Control Buttons. x Sound control by the Control Buttons. x Input Signal Selection Button [To lock] (1) Switch off the monitor’s power by the power switch on the control panel.
English EIZO Logo disappearing function When switching on the Power Switch on the control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.) [To undisplay] (1) Switch off the monitor’s power by the Power switch on the control panel. (2) Hold down the Enter button once again and turn the power back on. [To display again] (1) Switch off the monitor’s power by the Power switch.
English 4. ADJUSTMENT The monitor displays the digital input image correctly based on its pre-setting data. Adjust the brightness (p.23). 4-1. Screen Adjustment Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the display or whenever changing the system.
English 2. We recommend setting the desktop pattern to that as shown in the diagram below. NOTE x More precise adjustment is available for using the “Screen Adjustment program” utility software. It can be downloaded from the EIZO homepage (http://www.eizo.com/). 3. Adjust by using menu in the ScreenManager. (1) Vertical bars appear on the screen o Use the (p.37) adjustment. Select the and eliminate the vertical bars by using the Right and Left of the Control Buttons.
English (3) The screen position is incorrect. o Use the adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The “Position” adjustment moves the image to the correct position. Select and adjust the position by using the Up, Down, Right and Left Buttons.
English 6. To Set the Brightness of the screen. o Use the < Brightness > adjustment. The brightness of the entire screen is controlled by changing the brightness of the backlight. Select < Brightness > in the screen menu and adjust by using the Up and Down Buttons. NOTE x Directly pressing the Up and Down Buttons also adjusts the brightness. Press the Enter Button to save and exit the settings after the adjustment. 4.
English 4-2. Color Adjustment The menu in the ScreenManager enables to change the color of the screen. By using the , the adjustment mode can be selected from (to adjust the color settings according to your preference) and mode. In the analog input, perform the “Range Adjustment” (p.22) before making the color adjustments. NOTE x Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.
English Menu Saturation Color Mode Custom sRGB - Function Descriptions To change the saturation Adjustable range -128 a 127 Setting the minimum level (-128) turns the image to the monochrome. NOTE x The adjustment may cause undisplayable color tone. Hue - To change the flesh color, etc. -32 a 32 NOTE x The adjustment may cause undisplayable color tone. Gain (p.
English 4-3. Power-save Setup The menu in the ScreenManager enables to set the power-save setup. NOTE x Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. Analog Input This monitor complies with the VESA DPMS (p.38). [Procedure] (1) Set the PC’s power saving settings. (2) Select “VESA DPMS” from the menu.
English Power save for speaker When the monitor is in the power-saving mode, sound of speaker also erases simultaneously can be performed. [Procedure] (1) Set the PC’s power saving settings. (2) Select . (3) Select “Disable”. (“Enable” is selected to leave sound.) 4.
English 5. ATTACHING AN ARM The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor. Using our optional arm or stand is recommended. (Ask your local dealer for information.) NOTE x If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.
English 6. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. x No picture problems : See No.1 ~ No.2 x Imaging problems : See No.3 ~ No.9 x Other problems : See No.10 ~ No.13 x Touch Panel Problems: See No. 14 ~ No.17 Problems 1. No picture x Indicator status: Off x Indicator status: Blue x Indicator status: Yellow x Indicator status: Flashing Yellow (twice for each) 2.
English Problems Points to check with possible solutions 3. Display position is incorrect. Adjust the image position using the (p.22) The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings. Using this adjustment selects the appropriate display mode. (This function effects only when the resolution is VGA 720 x 400 (70 Hz) or 320 x 200 (70 Hz).
English Problems 10. The cannot be selected. Points to check with possible solutions is disabled when the screen is displayed in the 1024 x768. The adjustment lock is probably on. To unlock: 11. The Enter Button does not operate. switch the LCD monitor off. Then, while pressing the Auto Adjustment Button switch, the power on. (p.18) 12. The Auto Adjustment Button does not operate. The adjustment lock is probably on. To unlock: switch the LCD monitor off.
English x Touch Panel problems Problems Points to check with possible solutions Locate the monitor where no influence of the 14. Cursor is jittery. / Drawing lines are metal. not straight and smooth. Run the Stabilize Cursor option from the TouchWare (Touch Panel driver). 15. Cursor position is not correct. / Cursor jumps. The drawing touch for a long time may cause cursor jump or incorrect cursor position. Keep metals away from the panel surface. Point and touch with one finger only.
English 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE x Never use thinner, benzene, ethanol, abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or panel. x Never use spray for preventing static electricity, as it may influence the sensibility of the touch panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent.
English 8. SPECIFICATIONS LCD Panel 38 cm (15.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: H: 170q, V: 170q Response Time: approx. 55 ms Dot Pitch 0.297 mm Horizontal Scan Frequency Analog: 24 ~ 61 kHz (Automatic) Digital: 31 ~ 49 kHz Vertical Scan Frequency Analog: 55 ~ 75 Hz (Automatic) Digital: 59 ~ 61 Hz, (VGA Text : 70Hz) Resolution 0.8 M pixels (1024 dots x 768 lines) Dot Clock (Max.) Analog: 79 MHz Digital: 66 MHz Display Colors 16 million colors (max.
English Environment conditions Temperature Operating: 0 qC ~ 35 qC (32 qF ~ 95 q F) Storage: -20 qC ~ 60 qC (-4 qF ~ 140 q F) Humidity 30% to 80% R.H.
English Pin Assignment D-Sub mini 15 pin connector 3 4 5 15 1 2 8 9 10 7 6 14 13 12 11 Pin No. 1 2 3 4 5 Signal Red video Green video Blue video Ground No pin Pin No. 6 7 8 9 10 Signal Red ground Green ground Blue ground No pin Ground Shorted Pin No. 11 12 13 14 15 Signal Ground Shorted Data (SDA) H. Sync V. Sync Clock (SCL) DVI-D Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No.
English 9. GLOSSARY Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use. The “Afterimage” can be removed gradually by changing the displayed image. Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system.
English Gamma Generally, the relationship that the light intensity values of a monitor change nonlinearly to the input signal level is called “Gamma Characteristic”. On the monitor, low gamma values display the whitish images and high gamma values display the high contrast images. Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen.
APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below 12 factory presets have been registered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 12 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
For U.S.A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan L362T is in conformity with Part 15 of the FCC Rules.
Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner von Roll MBB Recycling GmbH.Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse: www.eizo.de.
