SAFETY SYMBOLS PRECAUTIONS 1. INTRODUCTION 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable (D-Sub or DVI) 2-3.Connecting the Signal Cable (ADC) 2-4.Connecting Two PCs to the Monitor 2-5.How to install the Hood 2-6.How to remove the Tilt Stand 3. ScreenManager 3-1.How to use the ScreenManager 3-2.ScreenManager Adjustments and Settings 3-3.FineContrast 3-4.Useful Functions 4. ADJUSTMENT 4-1.Screen Adjustment 4-2.
7. CLEANING 8. SPECIFICATION 9.
This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved.
PowerManager is a trademark of EIZO NANAO CORPORATION. ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase.
IMPORTANT! ● ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).
Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet.
Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels:99.9994%or higher. The backlight of the LCD panel has a fixed life span.
Thank you very much for choosing an EIZO Color Monitor. ● ● ● ● ● ● ● ● The exclusive use calibration software calibrates the monitor characteristics and generate colorprofile. Dual inputs compliant DVI Digital input (TMDS) compliant. ADC (Apple Display Connector) inputs compliant.
* LCD Monitor * Power Cord * Analog Signal Cable (FD-C16) * Digital Signal Cable (FD-C39) * EIZO USB Cable (MD-C93) * EIZO LCD Utility Disk * User's Manual (in the CD-ROM) * Calibration software "ColorNavigator" (in the CD-ROM) * Setup Guide * ColorNavigator Quick Reference * LIMITED WARRANTY * Adjustment Certificate * Cleaning kit "ScreenCleaner" * Hood * Please retain the packing materials for future transference.
(1) (2) (3) (4) (5) (6) (7) (8) ScreenManager® Mode Switch Auto Adjustment Switch Enter Switch Directing Switch (Left, Down, Up, Right) Input Signal Selection Switch Power Switch Indicator lamp*1 Name The monitor status when each lamp on Custom mode of FineContrast Mode Custom sRGB mode of FineContrast Mode sRGB Left Side EMU EMU mode of FineContrast Mode CAL CAL mode of FineContrast Mode Notify that the monitor needs to be recalibrated in CAL mode or EMU mode. Adj.
(9) (10) (11) (12) (13) (14) USB Port (2 Downstream) USB Port (1 Upstream) Height Adjustable Stand (Detachable)*2 Security Lock Slot*3 DVI-I Input Connector (SIGNAL 1, SIGNAL2) Power Connector *2 The LCD monitor can be used with an optional arm stand by removing the stand. (See "2-6. How to remove the Tilt Stand"). *3 Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system.
Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.
Digital Input The monitor supports the following resolutions only. Resolution Frequency Dot Clock Remarks 640 x 480 60 Hz VGA 720 x 400 70 Hz VGA TEXT 800 x 600 60 Hz VESA 1024 x 768 60 Hz VESA 1280 x 960 60 Hz 162 MHz VESA (Max.) 1280 x 1024 60 Hz VESA 1600 x 1200 60 Hz VESA 1680 x 1050 60 Hz VESA CVT 1680 x 1050 60 Hz VESA CVT RB (Reduced Blanking) 1920 x 1200 60 Hz VESA CVT RB (Reduced Blanking) * Be sure that the power switches of both the PC and the monitor are OFF. 1.
Analog Input Signal Cable Signal Cable (FD-C16 enclosed) Connector Video Output Connector / D-Sub mini 15 pin Input Connector (monitor) / DVI PC Standard graphics card Power Macintosh G3 (Blue & White) Power Mac G4 (VGA) Signal Cable (FD-C16 enclosed) +Adapter* Video Output Macintosh Connector / D-Sub 15 pin Input Connector (monitor) / DVI *Macintosh Adapter (Optional) Digital Input Signal Cable Signal Cable (FD-C39 enclosed) Connector Video Output Connector / DVI Input Connector (monitor) / DVI PC D
3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the monitor. * The cables are recommended to lead with slight sag for the smooth motion of the stand. * It's recommended to put away the signal cables into the left cable holder, and the USB cable and power cord into the right cable holder. 4.Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country.
5.Turn on the monitor's main power and then switch on the PC's power. The indicator lamp, "ON", will light up. If an image does not appear, refer to the "6. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. * Adjust brightness of the screen depending on the brightness of your environment.
Signal Cable Signal Cable (FD-C39 enclosed) +ADC-DVI display adapter (commercially available) Connector Video Output Connector / ADC Input Connector (monitor) / DVI PC Power Mac G4 / G5(ADC) * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor. 3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the monitor.
4.Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. 5.Touch the power switch while touching the Input Signal Selection switch. The Input Selection menu is appeared on the screen.
* The unit is designed to be operated with your bare fingers. If you touch the control panel with your gloved fingers or with something left on the control panel, it may not work. * If there are waterdrops or dew condensation on the control panel, or operating with wet fingers, it may not work properly. In that case, be sure to dry or wipe it up before use. 6.Change SIGNAL 1 (DVI-I Connector) in the Input Selection menu to "ADC". Touch the Enter switch to complete the setting and the menu closes. 7.
Two PCs can be connected to the monitor through DVI-I connector and D-sub mini 15 pin connector on the back of the monitor. (EX.1) Digital ADC (EX.2) Digital ADC (EX.
Signal Cable (FDC39 enclosed) Signal Cable FD-C16 enclosed) D-Sub mini 15 Analog pin Signal Cable (FDC39 enclosed) Signal Cable (FDC16 enclosed)+ Adapter* (EX.4) Digital DVI-D (EX.5) Digital DVI-D Signal Cable (FDC16 enclosed) D-Sub (EX.
The Priority Input Signal This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the "Input Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.
The Hood can reduce light reflection for on screen color consistency. Setup Procedure 1.Attach the top cover to either the left cover or right cover before attaching to the monitor. * Please attach the top cover so that the visor is in back. If the visor is in front, light will seep in through the back. 2.Attach the left cover and right cover to the monitor. (1) Firmly attach the left cover and right cover to the monitor from beneath.
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor. * If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. ● ● ● Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant) Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable TÜV/GS approved arm or stand * Please connect cables after attaching an arm stand.
3.Attach an arm stand to the LCD monitor securely.
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. * Main Menu and FineContrast menu cannot be activated at the same time. 1.Entering the ScreenManager Touch the Enter switch once to display the main menu of the ScreenManager. 2.Making Adjustments and Settings (1) Select the desired sub menu icon using the Directing switch and touch the Enter switch. The sub menu appears.
3.Exiting the ScreenManager (1) To return to the main menu, select the icon or touch the Down switch twice, followed by the Enter switch. (2) To exit the ScreenManager, select icon or touch the Down switch twice, followed by the Enter switch. * Double clicking the Enter switch at any time also exits the ScreenManager menu. FineContrast menu Touching the Mode switch allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU and CAL.
Gain 6 Colors Reset PowerManager DVI DMPM VESA DPMS Others Screen Size Border Intensity Input Priority Off Timer Beep Menu Settings Menu Size Menu Position Menu Off Timer Translucent Indicator Reset Information Information Language ** 4-4. Power-save Setup * 4-2.Displaying a low resolutions Select the priority input signal. Set the monitor's off timer to on or off. Set the monitor's beeper to on or off. Change the size of the menu. Adjust the menu position. Set the menu displaying time.
This function allows you to select the best suited mode for screen display. To select the Mode Touching the Mode switch allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU and CAL. Exit Touch the Enter switch to exit the menu. FineContrast Mode Selectable FineContrast modes are as follows. Custom sRGB To adjust the color settings according to your preference. To display the screen images based on those original colors (ex. over the Internet).
Color Adjustment of the Mode Settings , and settings can be adjusted on the FineContrast menu. Select the desired function icon with the Up/Down Directing switches and adjust with the Left/Right Directing switches. (Setting(s) of , and/or is defined as standard default in some modes.) Detailed Adjustments The detailed color settings of each mode can be adjusted by using the menu of the ScreenManager.
switch while touching the Auto Adjustment switch. [To unlock] Turn off the monitor's power by touching the power switch. And then touch the power switch while touching the Auto Adjustment switch once again. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed.
Indicator setting The brightness of indicator lamps can be changed and turned off, when the screen is displayed (Operation mode). [Procedure] (1) Select in the ScreenManager menu. (2) If you desire to turn off the lamps, select "Off". The following lamp are turned off. ● ● ● ● Custom / sRGB / EMU / CAL Adj. Lock Signal1 / Signal2 ON If you desire to change the brightness of the lamps, select "High" , "Medium" or "Low".
The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the display or whenever changing the system.
2.Run the "Screen Adjustment Program". Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.) * If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram on the following. 3.Adjust by using menu in the ScreenManager.
(2) Horizontal bars appear on the screen. Use the adjustment. => Select the and eliminate the horizontal flickering, blurring or bars by using the Right and Left switches. * Horizontal bars may not completely disappear from the screen depending on the PC. (3) The screen position is incorrect. Use the adjustment. => The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed.
(4) Screen image is smaller or larger than the actual screen images. Use the adjustment. => Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select and confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the Up and Down switches and adjust the horizontal resolution using the Right and Left switches. 4.
1.Enlarge the screen size when displaying a low resolution. => Select the . Select the in the others menu and select the screen size by using the Up and Down buttons. Menu Full Enlarged Normal Function Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and the horizontal resolution are enlarged at different rates, some image may appear distorted.
* is disabled when the screen is displayed in the following resolutions. ● ● 1920 x 1200 The image size is doubled both in horizontally and vertically to (i.e. 1600 x 1200 enlarged from 800 x 600) provide clear focus which does not require this function. 3.Set the brightness of the black area surrounding the displayed image. => Set the . In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usually black.
Icons Functions "*": Settable/Adjustable FineContrast Modes Custom sRGB EMU CAL Brightness** * * - - Temperature** * - - - * - - - Saturation * - - - Hue * - - - * - - - Gamma** Gain 6 colors Reset * * **These settings can be also adjusted on the FineContrast menu. * Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allow the monitor to warm Up for at least 30 minutes before making adjustments.
* The values shown in the Kelvin are available only as a Gamma reference tool. * Adjusting the turns the adjustment "OFF". * Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".) To set the gamma value 1.8 ~ 2.6 (in 0.2 increments) * If setting the gamma value, the using the monitor in the Saturation digital signal input is recommended.
The menu in the ScreenManager enables to set the power-save setup. * Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. * Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the Upstream and the Downstream ports).
Digital Input This monitor complies with the "DVI DMPM". [Procedure] (1) Set the PC's power saving settings. (2) Select "DVI DMPM" from the menu. [Power saving system] PC Monitor Operation STAND-BY Power saving SUSPEND OFF Operation Power saving Indicator lamp ON Power Save Light Off Off [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen .
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub which the USB compliant peripherals can be easily connected. Required System Environment * PC equipped with USB ports or another USB hub connected to the USB compliant PC * Windows 98/2000/XP//Mac OS 8.5.1 or later * EIZO USB Cable (MD-C93, enclosed) * The USB hub function may not work properly depending on the PC, OS or peripherals.
3.After setting up, the monitor's USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor.
If a problem persists even after applying the suggested remedies, contact an EIZO dealer. ● ● ● ● No picture problems : See No.1 ~ No.2 Imaging problems : See No.3 ~ No.14 Other problems : See No.15 ~ No.18 USB problems : See No.19 ~ No.20 Problems 1. No picture Status of Indicator lamp "ON" is off. Status of Indicator lamp "ON" is light. Status of Indicator lamp "Power Save" is light. 2. Following messages appear. (Error messages shown below will remain on the screen for 40 seconds.
The signal frequency is out of [ ] Use the graphics board's utility software to range. Error signal frequency will change the frequency setting. (Refer to the be displayed in red. (Example) manual of the graphics board.) 3. Display position is incorrect. [ ] Adjust the image position using the . [ ] If the problem persists, use the graphics board's utility software to change the display position if available. 4. Screen image is smaller or larger than the actual screen images.
7. Horizontal bars of distortion appear. [ ] Decrease the horizontal bars using the . 8. Letters and lines appear blurred. [ ] Adjust the blurred lines using . 9. Distortion appears like the [ ] This happens when both composite (X-OR) input signal and separate vertical figure below. synchronizing signal are input. Please select one of the two. 10.The screen is too bright or too dark. 11. Afterimages appear. 12.The screen has defective pixels (e.g. slightly light or dark).
15.The cannot be selected. 16.The Main menu of ScreenManager does not operate. 17.The Auto adjustment switch does not operate. 18.Frequency does not change after installing "Monitor information file" in the attached utility disk on Windows 98/Me/2000/ XP. [ ] is disabled when the screen is displayed in the 1920 x 1200. [ ] is disabled when "Normal" is selected in the menu. [ ] The image size is doubled both in horizontally and vertically to (i.e.
19.USB function cannot be setup. 20.PC is hung up. / The peripherals connected to the downstream ports do not operate. [ ] Check that the USB cable is correctly connected. [ ] Check that the PC and OS are USB compliant. (For verification of USB support, consult the manufacturer of each system.) [ ] Check the PC's BIOS setting for USB. ( For details, refer to the manual of the PC.) [ ] Check that the USB cable is correctly connected.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. * Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.
56.4 cm (22.2 inch), TFT color LCD panel with Anti-Glare Hard Coating Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5) Dot Pitch 0.249 mm Horizontal Scan Analog: 31 - 94 kHz (Automatic) Frequency Digital: 31 - 76 kHz Analog: 49 - 86 Hz (Automatic) Vertical Scan (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61 Hz) Frequency Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz) Resolution 1920 dots x 1200 lines Dot Clock (Max.) Analog: 202.5 MHz, Digital: 162 MHz Display Colors 16 million colors (max.
Weight (without stand) 10.4 kg (22.9 lbs.) Operating: 0 °C - 35 °C (32 °F - 95 ° F) Storage: -20 °C - 60 °C (-4 °F - 140 ° F) Humidity 30% to 80% R.H. Non-condensing USB Specification Revision 2.0 Temperature USB standard Communication speed USB ports 480Mbps(high), 12 Mbps (full), 1.
2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer. The power will be off within fifteen minutes.
Signal Pin No. Signal 1 TMDS Data 2- 11 TMDS Data 1/3 Shield 21 NC 2 TMDS Data 2+ 12 NC 22 TMDS Clock Shield NC 23 TMDS Clock+ 24 TMDS Clock- C1 Analog Red Pin No. Signal 4 TMDS Data 2/4 Shield NC* 5 NC 3 Pin No.
Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars of distortion are displayed on the screen. Color Temperature (Temperature) Color Temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.
Gain Adjustment Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed through the color filter of the LCD panel. Red, green and blue are the three primary colors. The colors on the monitor are displayed by combining these three colors. The color tone can change by adjusting the illumination amount passed through each color's filter.
Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO CG221 display panel consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are displayed as a full screen.
Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 30 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). 30 signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme de synchronisation ci-dessous.
VESA 800×600 VESA 800×600 VESA 800×600 VESA 800×600 VESA 1024×768 VESA 1024×768 VESA 1024×768 VESA 1024×768 VESA 1152×864 VESA 1280×960 VESA 1280×1024 VESA 1280×1024 VESA 1280×1024 VESA 1600×1200 VESA 1600×1200 VESA 1600×1200 VESA 1600×1200 VESA CVT 1680×1050 VESA CVT 1920×1200 VESA CVT RB 1920×1200 40.0 MHz Posi Posi 37.9 60.3 50.0 MHz Posi Posi 48.1 72.2 49.5 MHz Posi Posi 46.9 75. 0 56.3 MHz Posi Posi 53.7 85.1 65.0 MHz Nega Nega 48.4 60.0 75.0 MHz Nega Nega 56.5 70.1 78.
Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rücknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse: www.eizo.de.
Recycling Information for customers in USA: All recycling information is placed in the Eizo Nanao Technologies, Inc.'s website. http://www.eizo.com/ Återvinnings information för kunder i Sverige: All information om återvinning finns på Eizo Nordics hemsida: www.eizo.se Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen.
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position kippsicher sein.