English Important: Please read this “Instructions for Use”, and Installation Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. Gebrauchsanweisung Wichtig: Bitte lesen Sie diese „Gebrauchsanweisung“ und das separate Installationshandbuch sorgfältig durch, um sich mit dem sicheren und sachgemäßen Gebrauch des Produkts vertraut zu machen. Bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.
Color LCD monitor English Instructions for Use
SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING CAUTION Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a warning or caution. For example, indicates an “electrical shock” hazard. Indicates a prohibited action.
PRECAUTIONS • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • For personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor.
WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your EIZO representative for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Do not turn the bushing for fixing the AC adapter power cable.
WARNING • The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this manual may cause fire, electric shock, or equipment damage. Power supply: 100-120/200-240Vac 50/60Hz • Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord and AC adapter with care. Handle the power cord and AC adapter with care. Do not place heavy objects on, pull or tie the power cord or the AC adapter.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. Carry or place the unit according to the correct specified methods. • When carrying the unit, grasp and hold firmly as shown in the illustration below. • Do not unpack or carry the unit only by a single person, since the large size unit is so heavy. Dropping the unit may result in injury or equipment damage.
Notice for this monitor This product should be set to horizontal view mode when used for the purposes mentioned above. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
CONTENTS English Cover....................................................................... 1 PRECAUTIONS....................................................... 3 ●●IMPORTANT.................................................... 3 Notice for this monitor.......................................... 7 Cleaning..................................................................... 8 To use the monitor comfortably.............................. 8 CONTENTS..........................................................
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 30.0 inches • Supports to the resolution of 6M pixels (3280 × 2048 dots) • Uses high-contrast panel (1000:1). Enables the display of sharp images. • Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals) • The “PbyP (Picture by Picture)” function enables the display of two signals at the same time.
Attention 1-2. Package Contents Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local EIZO representative. Note • Please keep the packaging box and materials for future movement or transport of the monitor. • USB cable : UU300 • Monitor • Power cord • Digital signal cable: DisplayPort - DisplayPort (PP300) × 2 pcs.
1-4. Controls and Functions Monitor 5 4 11 Adjustment menu*1 13 12 3 67 8 9 10 14 2 1 1. Operation switches switch 2. 3. Presence Sensor 4. Integrated Front Sensor (slide type) 5. Ambient Light Sensor 6. USB downstream port 7. USB upstream port 8. 9. 10. 11. 12. 13. 14. *1 Displays the menu. Follow the guide to perform the desired operations. • Turns the power on or off. • Indicates the monitor’s operation status.
Chapter 2 Setting Up English 2-1. Compatible Resolutions The monitor supports the following resolutions. √ : Supported Resolution*1 Applicable signal Dot Clock vertical scan frequency 640×480 VGA 60 Hz 720×400 VGA TEXT 70 Hz VESA 60 Hz 800×600 VESA 60 Hz 1024×768 240 MHz VESA 60 Hz 1280×1024 (Max.) 1600×1200 VESA 60 Hz VESA CVT RB 46 Hz 1536×2048 1536×2048 VESA CVT RB 60 Hz VESA CVT RB 1640×2048 43 Hz 1640×2048*3 VESA CVT RB 60 Hz *1 Compatible resolutions for the left and right screens.
2-2. Connecting Cables Attention • Check that the monitor and the PC are powered off. • When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and vertical scan frequency to those that are available for this monitor. Refer to the compatible resolution table before connecting the PC. Note • When connecting multiple PCs to this product, refer to the Installation Manual (on the CD-ROM). 1. Connect the signal cables to the input signal connectors and PC.
5. Turn on the AC adapter main power. -: On, ○: Off English 6. Connect the USB cable when using RadiCS LE or ScreenManager Pro for Medical. Connecting to the Monitor 7. Touch Connecting to a Computer to turn on the monitor. The monitor’s power indicator lights up green. 8. Turn on the PC. The screen image appears. If an image does not appear, refer to “Chapter 3 Troubleshooting” (page 17) for additional advice. Attention • Turn off the monitor and PC after using them.
2-4. Attaching a Power Cord Holder Attach the power cord holder to prevent the power cord from falling off. Attention • Be sure to attach the power cord holder when the main power to the AC adapter is off or before the power cable is plugged into the power outlet. 1. Attach the supplied power cord holder to the power cord attachment hole on the AC adapter. 2. Adjust the position to secure the power cord holder referring to the figure shown below. (1) Lower the power cord holder lever.
Chapter 3 Troubleshooting Problem 1. No picture • Power indicator does not light. • Power indicator is lighting green. • Power indicator is lighting orange. • Power indicator is flashing orange and green. 2. The message below appears. • This message appears when no signal is input. Example: Possible cause and remedy • Check whether the power cord and the adapter power cable are connected properly. • Turn the AC adapter main power switch on. • Touch .
Problem • The message shows that the input signal is out of the specified frequency range. Example: Possible cause and remedy • Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor (see “2-1. Compatible Resolutions” (page 13)). • Reboot the PC. • Select an appropriate setting using the graphics board’s utility. Refer to the manual of the graphics board for details.
Chapter 4 Specifications Video Signals USB Power Physical Specifications Type IPS (Anti-Glare) Backlight LED Size 76cm (30.0inch) English LCD Panel Native Resolution 3280 dots × 2048 lines Display Size (H x V) 645.5 mm × 403.0 mm Pixel Pitch 0.197 mm Display Colors 10-bit colors (DisplayPort) : 1.07 billion (maximum) colors of 68 billion colors 8-bit colors (DVI) : 16.
Outside Dimensions Unit: mm Monitor 131 35 67.5 109 478 501.5 692 647.5 302 TILT RA 22.25 NGE 2 5° 296 32 256.5 184.5 296 383.5 100 405 466 612.5 643 255~381（TILT 0°） 200 146.5 181.5 29 22.25 50 331.5 LOWEST POSITION 344° SWIVEL RANGE 28.5 255 281.
Accessories Network QC Management Software Cleaning Kit EIZO “RadiCS UX1” Ver. 4.3.0 or later EIZO “RadiCS Version Up Kit” Ver. 4.3.0 or later EIZO “RadiNET Pro” Ver. 4.3.0 or later EIZO “ScreenCleaner” English Calibration Kit For the latest information about the accessories and information about the latest compatible graphics board, refer to our web site. http://www.eizo.
Chapter 5 Glossary DDC (Display Data Channel) VESA provides the standardization for the interactive communication of the setting information, etc. between a PC and the monitor. DICOM (Digital Imaging and Communication in Medicine) The DICOM standard was developed by the American College of Radiology and the National Electrical Manufacturer’s Association of the USA. The DICOM compatible device connection enables to transfer the medical image and information.
Resolution sRGB (Standard RGB) International standard for color reproduction and color space among peripheral devices (such as monitors, printers, digital cameras, scanners). As a form of simple color matching for the Internet, colors can be displayed using tones close to those of the transmission and reception devices. Temperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.
Appendix Trademark The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Electronics Standards Association. Acrobat, Adobe, Adobe AIR, and Photoshop are registered trademarks of Adobe Systems Incorporated in the United States and other countries.
Medical Standard English • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement. • Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided.
FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO Inc. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: RadiForce RX650 is in conformity with Part 15 of the FCC Rules.
EMC Information Essential performance of RadiForce series is to display images and operate functions normally. The RadiForce series requires special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use any cables other than the cables that provided or specified by us. Using other cables may cause the increase of emission or decrease of immunity. Cable Length: Max.
Guidance and manufacturer’s declaration - electromagnetic immunity The RadiForce series is intended for use in the electromagnetic environment specified below. The customer or the user of the RadiForce series should assure that it is used in such an environment. Immunity test IEC/EN60601 test level Compliance level Conducted RF IEC/EN61000-4-6 3Vrms 150kHz to 80MHz 3Vrms Radiated RF IEC/EN61000-4-3 3V/m 80MHz to 2.
Recommended separation distances between portable and mobile RF communications equipment and the RadiForce Series NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
China Measures for RoHS Compliance in ChinaRoHS About the Electronic Information Products Pollution Control Symbol This symbol identifies products regulated by the ‘Measures for the Administration of the Control of Pollution by Electronic Information Products,’ and is applicable to electronic information products for sale in the People’s Republic of China.The number in the circle is the Environmentally Friendly Use Period (EFUP).
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 中国苏州市苏州工业园区展业路8号中新科技工业坊5B Phone: +86 512 6252 0100 Fax: +86 512 6252 1508 Siemensallee 84, 76187 Karlsruhe, Germany Phone: +49 721 20321 0 Fax: +49 721 20321 471 http://www.eizo.com Copyright © 2013 EIZO Corporation All rights reserved. 2nd Edition-December, 2013 Printed in Japan. 00N0L842B1 (U.
