Installation manual

12
Chapter1Introduction
1-4. Controls and Functions
Monitor
Adjustmentmenu
*1
14
7
3
1
4
5
6
8 9 10
13
12
11
2
1. Operation switches Displaysthemenu.Followtheguidetoperformthedesiredoperations.
2.
switch
• Turnsthepoweronoroff.
• Indicatesthemonitor’soperationstatus.
Green:Operating,Orange:Powersavingmode,Off:Mainpower/poweroff
3. Presence Sensor Detectsthemovementofapersoninfrontofthemonitor.
4. Integrated Front Sensor
(slide type)
UsedforcalibrationandGrayscaleCheck.
5. Ambient Light Sensor Measurestheenvironmentalillumination.
6. USB downstream port ConnectsaperipheralUSBdevice.
7. USB upstream port ConnectstheUSBcabletousethesoftwarethatneedsUSBconnection,ortouse
USBHubfunction.
8. Power connector UsedtoconnecttheACadapterpowercable.
9. Input signal connector DVI-Dconnector
10. Input signal connector DisplayPortconnector
11. USB downstream port ConnectsaperipheralUSBdevice.
12. Stand Usedtoadjusttheheightandangleofthemonitorscreen.
13. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
14. Cable holder Coversthemonitorcables.
*1 For instructions for use, refer to the Installation Manual (on the CD-ROM).
AC adapter (PSA-073)
21 3
4
1. Power cord holder
attachment hole
Usedtoattachthepowercordholder.
2. Power connector Connectsthepowercord.
3. Main power switch Turnsthemainpoweronoroff.
4. Power cable Connectswiththepowerconnectoronthemonitor.