Installation manual

14
Chapter2AdjustingScreens
●
To set the detection type in the monochrome display area
You can set the detection type in the monochrome image display area.
Procedure
1. Choose “Color” from the Adjustment menu, and choose
.
2. Choose “Hybrid Assignment” from “Color”, and choose
.
3. Select “Full Scan” or “Custom” with
or .
4. Choose
to exit.
Detection Type Purpose
FullScan Identiesthemonochromeimagedisplayareaautomatically.
Custom Allowsyoutosetthemonochromeimagedisplayareamanuallyusingsoftware.
●
To set the highlight area in the monochrome display area
You can set On/Off for the highlight area in the monochrome image display area.
Procedure
1. Choose “Color” from the Adjustment menu, and choose
.
2. Choose “Highlight Area” from “Color”, and choose
.
3. Select “On” or “Off” with
or .
4. Choose
to exit.
Note
• You can set On/Off for the highlight area with .