Installation manual

16
Chapter3SettingMonitor
3-4. Locking Operation Switches
This function allows you to lock the adjusted/set status to prevent changing them.
Procedure
1. Touch
to turn off the monitor.
2. While holding down the
switch at the far left, touch for at least two seconds to turn on the
monitor.
The “Optional Settings” menu appears.
3. Choose “Key Lock” from “Optional Settings”, and choose .
4. Choose “Off”, “Menu”, or “All” with
or , and choose .
Settings Switches that can be locked
Off
(Defaultsetting)
None(Allswitchesareenabled)
Menu
switches(adjustments/settingsusingthe
Adjustmentmenu)
All
Allswitchesexcluding

5. Select “Finish” with or .
6. Choose
.
The “Optional Settings” menu is closed.
3-5. Enabling/Disabling DDC Communication
This function allows you to enable/disable the DDC communication. Normally, turn it on during use. (This is
different from the DDC/CI communication.)
Attention
• The DDC communication uses signal 1 (DVI) only.
Procedure
1. Touch
to turn off the monitor.
2. While holding down the
switch at the far left, touch for at least two seconds to turn on the
monitor.
The “Optional Settings” menu appears.
3. Choose “DDC” from “Optional Settings”, and choose .
4. Select “On” or “Off” with
or , and choose .
5. Select “Finish” with
or .
6. Choose
.
The “Optional Settings” menu is closed.