Installation manual

22
Chapter5PowerSavingFunctions
5-3. Setting the power saving mode when a person
leaves the monitor
The sensor on the front of the monitor detects the movement of the operator when Presence Sensor is set to “On”.
When a person moves away from the monitor, it shifts to the power saving mode automatically and does not display
the images on the screen to reduce the power consumption. When a person comes near the monitor again, it
recovers from the power saving mode and displays the images. The sensitivity and time until the power saving
mode is activated can be set according to the monitor usage environment and movement of the user.
Note
• At the time of shifting to power saving mode, the message that indicates shifting is displayed.
Attention
• This setting cannot be used during “RadiCS SelfQC” execution.
Procedure
1. Select “PowerManager” from the Adjustment menu, and choose
.
2. Select “Presence Sensor” from “PowerManager”, and choose
.
3. Select “On” or “Off” with
or .
4. Choose
to exit.
5. After selecting “On”, set the details.
Item Setting Range Description
Time 5,30sec
1,3,5,10,15,30,45,60min
Speciesthetimefromwhenapersonleavesthemonitoruntil
the“NoPresencedetected”messageappears.Themonitor
shiftstothepowersavingmodeabout20secondsafterthe
messageisdisplayed.
Sensitivity Level5
Level4
Level3
Level2
Level1
Whenthesettinglevelishigh(“Level5”atmaximum),even
minormovementsofapersonaredetected,causingthe
monitortoshifttothepowersavingmodeonlyinfrequently.
Ontheotherhand,whenthesettinglevelislow(“Level1”at
minimum),onlymajormovementsofapersonaredetected,
allowingthemonitortoshifttothepowersavingmode
frequently.ThePresenceSensorfunctionisactivatedwhen
thesensoronthefrontofthemonitordetectsthemovementof
heat.Therefore,thesensitivityshouldbechangeddepending
onthetypicaluser’sclothesorthetypicalroomtemperature.If
themonitorshiftstoorrecoversfromthepowersavingmode
contrarytoyourexpectations,trychangingthesettinglevel.
Reset - Thisfunctionresetsalladjustmentstothedefaultsettings.
Note
• To use the monitor comfortably, increase the sensitivity for high temperatures, which reduces the detection sensitivity,
and reduce the sensitivity for low temperatures, which increases the detection sensitivity.