Installation manual

Chapter7Reference

●

To set input signal selection

Setting Function

Auto Themonitorautomaticallyidentiestheconnectorscarryingcomputerinputsignalsand

displaystherespectiveimagesontheleftandrightscreens.(Example:DisplayPort1-

DisplayPort2/DisplayPort1-DVI2/DVI1-DisplayPort2/DVI1-DVI2)

WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically

displaysanothersignal.

Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Selectan

activeinputsignalwith“Input”.

Procedure

1. Choose “Tools” from the Adjustment menu, and choose

2. Choose “Input Selection” from “Tools”, and choose

3. Select “Auto” or “Manual” with

or .

4. Choose

to exit.

Note

• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in the

power saving mode.