User Manual

31
Chapter 6 Reference
●
To set input signal selection [Input Selection]
The monitor recognizes the connector through which PC signals are input.
Priority setting Function
Auto When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
Manual The monitor detects only the PC’s signals currently displaying automatically. Select
an active input signal with .
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <Input Selection> from the <Tools> menu, and press .
The <Input Selection> menu appears.
Select “Auto” or “Manual” with or .
Press to exit the adjustment.
Attention
When “Auto” is selected for <Input Signal>, the monitor’s power-saving function works only when all PCs are in
the power-saving mode.
•
1.
2.
3.
4.