Important Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read to the Setup Guide for basic information ranging from connection of the monitor to a PC to using the monitor. • The latest User’s Manual is available for download from our site: http://www.eizo.
[Location of the Caution Statements] Ex. Height adjustable Stand As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com Product specification may vary with sales areas.
Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. [LCD Panel] • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finishing.
CONTENTS Cover . ............................................................ 1 Notice for this monitor............................................... 3 2-12 Displaying the level of power saving by EcoView Index................................................. 19 2-13 Locking Buttons............................................... 19 CONTENTS.............................................................. 5 ● To lock adjustments/settings in the Adjustment Chapter 1 Features and Overview..................
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Applicable to the resolution of 1280 × 1024 • Stereo speakers • Power saving function Suppressing the power consumption* reduces the carbon dioxide emissions. This product is equipped with various power saving functions. – Auto EcoView function The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.
1-2 Buttons and Indicators Ex. Height adjustable Stand Adjustment menu (ScreenManager*1) 14 9 10 1 2 3 4 5 6 7 1 2 3 4 5 Sensor EcoView button Volume control button Input Signal Selection button Control buttons (Left, Right) 6 Enter button 7 8 Power button Power indicator 9 10 11 12 13 14 15 16 Security lock slot Stand*2 Power connector Input signal connectors Stereo mini jack Cable holder Speaker Headphone jack 8 15 11 12 16 13 The sensor detects ambient brightness.
1-3 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 9 for operation) (for analog signal input only) 1 • The Adjustment menu and the EcoView menu cannot be displayed at the same time. ● Setting On/Off for the automatic brightness adjustment function [Auto EcoView]…………………………… see page 19 . 1 Press or 2 Change “On” and “Off” with . ● Displaying the level of power saving by EcoView Index……………………………………… see page 19 to display the level of power saving mode.
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Information page 18 ● Displaying monitor information [Information] Language page 19 ● Setting Language [Language] Setting Input Signal Selection ● To set input signal selection [Input Signal]… ……………………… see page 21 Off Timer Setting ● Turning off the monitor automatically [Off Timer]……………………………… see page 18 Setting Adjustment Menu Position ● Setting Adjustment Menu Position [Menu Position]… …………………… see page 18 ● Set
Chapter 2 Settings and Adjustments 2-1 Set a Sync-on-Green Signal When inputting a sync-on-green signal, the [SoG] setting for the monitor must be changed in advance according to the procedure below (for analog signal). (1) Press to turn off the monitor. holding (2) Press (3) Select “On” with down to turn on the monitor. or , and press . 2-2 Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions.
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the "Screen Resolution" dialog, select the monitor . 4. Click "Resolution" to select the desired resolution. 5. Click the [OK] button. 6. When a confirmation dialog is displayed, click [Keep changes].
2-3 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and User’s Manual. Refer to “Readme.txt” file on the disk for software startup procedures or file access procedures. Item Overview OS A “Readme.
2-4 Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and/or lines appear blurred, go to step 6 “● To modify blurred characters/lines [Smoothing]” (page 15). When performing more advanced adjustment, see “2-5 Color Adjustment” (page 16) and subsequent pages.
3 Perform the auto adjustment again with the analog screen adjustment pattern displayed. ● To adjust flickering, screen position, and screen size automatically [Screen] (1) Display Pattern 1 of the “Screen adjustment pattern files” in full screen on the monitor. (2) Choose from the menu, and press . The menu appears. (3) Select “Execute” with or , and press . Flickering, screen position, and screen size are corrected by the autoadjustment function.
● To correct screen position [Hor. Position], [Ver. Position] NOTE (1) Choose and or from the . menu, and press The or menu appears. (2) Adjust the position with or to display the image properly in the display area of the monitor. • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly.
2-5 Color Adjustment ● To select the display mode (FineContrast mode) This function allows you to select the best display mode for monitor brightness, etc. FineContrast mode Mode Purpose Custom Available for making desired setting. EyeCare Allows the brightness to be set lower than possible with other modes. Paper Reduce the contrast and color temperature to view the result when printed on paper. Text Suitable for displaying texts for word processing or spreadsheets.
Menu Brightness Description NOTE Adjustment range To adjust the full screen brightness as desired • Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and keyboard of your PC. The adjusted status can be registered as a color data and restore the data later. (Refer to “Chapter 4 Color Adjustment” on the User’s Manual for “ScreenManager Pro for LCD”.
2-6 Turning off the monitor automatically [Off Timer] This function allows you to switch the setting to turn off the monitor automatically after a specified time has passed at the power saving mode. Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 1-5h) . (1) Choose from the Adjustment menu, and press (2) Choose from the menu, and press . The menu appears. (3) Select “Enable” or “Disable” with or .
2-10 Setting Language [Language] This function allows you to select a language for the adjustment menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Simplified Chinese/ Traditional Chinese/Japanese (1) Choose menu from the Adjustment menu, and press . The menu appears. (2) Choose a language with The setting is completed. or , and press .
2-14 Enabling/Disabling DDC/CI communication NOTE This function allows you to enable/disable the DDC/CI communication. (1) Press to turn off the monitor. (2) Press holding down to turn on the monitor. • You can check the DDC/CI setting in the menu. The Enable/Disable setting is toggled by performing the operation in step 2. 2-15 Setting EIZO logo display ON/OFF The EIZO logo appears on the display when turning on the monitor. This function allows you to display, or not, the EIZO logo.
Chapter 3 Connecting Cables 3-1 Connecting Multiple PCs to the Monitor Multiple PCs can be connected to the DVI-D, D-Sub mini 15 pin connector on the back of the monitor to switch the display. Connection examples D-sub mini DVI-D connector 15-pin Connector To PC 2 To PC 1 D-sub mini 15-pin Connector DVI connector Signal cable (Digital) FD-C39 (supplied) Signal cable (Analog) MD-C87 (supplied) ● To switch the input signal Input Signal Selection button Switch the input signal with .
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • • • • No-picture problems → See No.1 - No.2. Imaging problems (digital input) → See No.6 - No.11. Imaging problems (analog input) → See No.3 - No.11. Other problems → See No.12 - No.14. Problems 1. Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly.
Problems Possible cause and remedy 6. Characters are blurred. • Check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor. (page 10) • Adjust using . (page 15) 7. The screen is too bright or too dark. • Adjust using or . (The LCD monitor backlight has a fixed life span. When the screen becomes dark or begins to flicker, contact your local dealer.) • Turn on the Auto EcoView function.
Chapter 5 Reference 5-1 How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable 2 Remove the stand. (Prepare a screwdriver.) 3 Attach the monitor to the arm or stand. 24 surface with the panel surface facing down.
5-2 Power Saving Mode Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Operating Power saving Power Indicator Monitor STAND-BY SUSPENDED OFF Operating Blue Power saving Orange Attention • Unplugging the power cord completely shuts off power supply to the monitor. • Power consumption varies even when the stereo mini jack cable is connected. Digital input This monitor complies with the DVI DMPM standard.
5-3 Specifications S1701-X LCD Panel 17-inch (43 cm) TFT color LCD with hard coating Viewing angle: Horizontal 160°, Vertical 160° (CR: 10 or more) Dot Pitch 0.264 mm Horizontal Scan Frequency Analog: 31 - 80 kHz Digital: 31 - 64 kHz Vertical Scan Frequency Analog: 50 - 75 Hz (Non-interlace) Digital: 59 - 61 Hz (VGA Text: 69 - 71 Hz) (Non-interlace) Resolution 1280 dots × 1024 lines Max. Dot Clock Analog: 135 MHz Digital: 108 MHz Max. Display Colors Approx. 16.77 million colors (1064.
Environmental Conditions Temperature Operating temperature: 5 °C - 35 °C (41 °F - 95 °F) Storage temperature: –20 °C - 60 °C (-4 °F - 140 °F) Humidity Operating humidity: 20% - 80% R.H. (no condensation) Storage humidity: 10% - 80% R.H. (no condensation) Pressure Operating: 700 to 1,060 hPa Storage: 200 to 1,060 hPa S1721-X LCD Panel 17-inch (43 cm) TFT color LCD with hard coating Viewing angle: Horizontal 178°, Vertical 178° (CR: 10 or more) Dot Pitch 0.
Environmental Conditions Temperature Operating temperature: 5 °C - 35 °C (41 °F - 95 °F) Storage temperature: –20 °C - 60 °C (-4 °F - 140 °F) Humidity Operating humidity: 20% - 80% R.H. (no condensation) Storage humidity: 10% - 80% R.H. (no condensation) Pressure Operating: 700 to 1,060 hPa Storage: 200 to 1,060 hPa S1902 LCD Panel 19-inch (48 cm) TFT color LCD with anti-glare hard coating Viewing angle: Horizontal 170°, Vertical 160° (CR: 10 or more) Dot Pitch 0.
Mass Main unit (including Tilt Stand) Approx. 6.0 kg (13.2 lbs) Main unit (including Height adjustable Stand) Approx. 7.2 kg (15.9 lbs) Main unit (including EZ-UP stand) Approx. 8.8 kg (19.4 lbs) Main unit (without stand) Approx. 5.2 kg (11.5 lbs) Movable range Tilt Stand Environmental Conditions Tilt: 30° Up, 5° Down Height adjustable Stand Tilt: 30° Up, 0° Down Swivel: 35° Right, 35° Left Adjustable height: 100 mm (3.
Audio output Speaker output: 0.5 W + 0.5 W (8 Ω, THD+N: 10% or less) Headphone output: 2mW + 2mW (32 Ω, THD+N: 3% or less) Line input Input impedance 47 kΩ (typ.) Input level: 1.0 Vrms (Max.) Plug & Play VESA DDC 2B/EDID structure 1.3 Dimensions (Width) × (Height) × (Depth) Mass Main unit (including Height adjustable Stand) 405 mm (15.9 inch) × 406.5 - 506.5 mm (16 - 19.9 inch) × 205 mm (8.1 inch) Main unit (including EZ-UP stand) 405 mm (15.9 inch) × 347.7 - 507 mm (13.7 - 20 inch) × 246.
Main default settings (factory settings) Auto EcoView On Smoothing 3 FineContrast Mode Custom Input Signal Auto Off Timer Disable Language English Chapter 5 Reference 31
Outside Dimensions S1701-X • Tilt Stand unit : mm (inch) TILT 5° 13.9 (0.55) 363 (14.3) 339.8 (13.4) 30° 59 (2.32) 36 (1.42) 131.5 (5.2) 100 (3.9) 131.5 (5.2) 13.9 (0.55) 82 (3.23) (94 (3.7)) 12.5 (0.49) 100 (3.9) 100 (3.9) 272.2 (10.7) 300 (11.8) 382 (15) 100 (3.9) 11.6 (0.46) (36.5 (1.44)) (150 (5.9)) (188 (7.4)) (218 (8.6)) • Height adjustable Stand unit : mm (inch) 36 (1.42) 59 (2.32) 334 (13.1) 172 (6.8) 35° SWIVEL 35° (216 (8.5)) (239 (9.4)) (320 (12.6)) 363 (14.3) 339.
S1721-X • Height adjustable Stand unit : mm (inch) 36 (1.42) 59 (2.32) 334 (13.1) 172 (6.8) 35° (216 (8.5)) 13.9 (0.55) 363 (14.3) 339.8 (13.4) 100 (3.9) 131.5 (5.2) 100 (3.9) 100 (3.9) 131.5 (5.2) 100 (3.9) 239.5 (9.4) (145 (5.7)) 89.5 (3.52) 7.8 (0.31) 272.2 (10.7) 300 (11.8) 389.5~489.5 (15.3~19.3) 421~521 (16.6~20.5) 13.9 (0.55) 58 (2.28) 11.6 (0.46) TILT 30° 100 (3.9) SWIVEL (239 (9.4)) (320 (12.6)) 9.4 (0.37) 35° (50.5 (1.99)) (205 (8.
S1902 • Tilt Stand 405 (15.9) 13.3 (0.52) 15.5 (0.61) unit : mm (inch) TILT 5° 378.4 (14.9) 152.5 (6) 100 (3.9) 152.5 (6) 15.5 (0.61) 82 (3.23) 117 (4.6) 416 (16.4) 100 (3.9) 303 (11.9) 334 (13.1) 117 (4.6) 61.5 (2.42) 38.5 (1.52) 30° (94 (3.7)) 12.5 (0.49) (42.5 (1.67)) (205 (8.1)) (241 (9.5)) • Height adjustable Stand unit : mm (inch) 38.5 (1.52) 61.5 (2.42) 374 (14.7) 172 (6.8) 35° (226 (8.9)) 35° 30° TILT (239 (9.4)) (320 (12.6)) 405 (15.9) 378.4 (14.9) 15.5 (0.61) 152.
• EZ-UP stand unit : mm (inch) (170 (6.7)) 121.3 (4.8) TILT 25° 152.5 (6) 347.7 (13.7) 186.1 (7.3) 13.7 (0.54) 173 (6.8) 153.9 (6.1) 340 (13.4) 173 (6.8) 137.5 (5.4) 60.5 (2.38) 74.4 (2.93) ° 30.7 (1.21) 152.5 (6) 69.5 φ240 (9.4) 100 (3.9) 374 (14.7) 117 (4.6) 153.9 (6.1) 507 (20) 517 (20.4) 301.1 (11.9) 334 (13.1) 131.8 (5.2) 38.5 (1.52) 117 (4.6) 61.5 (2.42) 405 (15.9) 376.3 (14.8) 100 (3.9) 2° 17 2° 17 SWIVEL 284.2 (11.2) 246.8 (9.
S1921-X • Height adjustable Stand unit : mm (inch) 38.5 (1.52) 61.5 (2.42) 374 (14.7) 172 (6.8) 35° SWIVEL 30° TILT 15.5 (0.61) (239 (9.4)) (320 (12.6)) 405 (15.9) 378.4 (14.9) 152.5 (6) 100 (3.9) 152.5 (6) 117 (4.6) 9.4 (0.37) (130 (5.1)) 72.5 (2.85) 7.8 (0.31) (47.5 (1.87)) (205 (8.1)) 37 (1.46) 15.5 (0.61) 239.5 (9.4) 100 (3.9) 303 (11.9) 334 (13.1) 406.5~506.5 (16~19.9) 442~542 (17.4~21.3) 100 (3.9) 117 (4.6) 13.3 (0.52) (226 (8.9)) 35° • EZ-UP stand unit : mm (inch) (170 (6.
Connector Pin Assignment • DVI-D connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No. Signal Pin No. Signal Pin No.
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the setting information, etc.
TMDS (Transition Minimized Differential Signaling) A signal transmission system for digital interface. VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS defines the signal status between PC and monitor.
5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). Mode VGA 640×480@60Hz Dot clock 25.2 MHz VGA TEXT 720×400@70Hz 28.3 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@75Hz 49.5 MHz VESA 1024×768@60Hz 65.0 MHz VESA 1024×768@75Hz 78.8 MHz VESA 1152×864@75Hz 108.0 MHz VESA 1280×960@60Hz 108.0 MHz VESA 1280×1024@60Hz 108.0 MHz VESA 1280×1024@75Hz 135.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan S1701/S1721/S1902/S1921 is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
BEGRENZTE GARANTIE EIZO NANAO CORPORATION (im Weiteren als „EIZO“ bezeichnet) und die Vertragsimporteure von EIZO (im Weiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der das in diesem Dokument vorgegebene Produkt (im Weiteren als „Produkt“ bezeichnet) von EIZO oder einem Vertrieb erworben hat, gemäß den Bedingungen dieser beschränkten Garantie (im Weiteren als „Garantie“ bezeichnet), dass EIZO und der Vertrieb nach eigenem Ermessen das
GARANTIE LIMITÉE EIZO NANAO CORPORATION (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés « Distributeurs »), sous réserve et conformément aux termes de cette garantie limitée (ci-après dénommée « Garantie »), garantissent à l’acheteur initial (ci-après dénommé « Acheteur initial ») du produit spécifié dans la présente (ci-après dénommé « Produit ») acheté auprès d’EIZO ou de Distributeurs agréés EIZO, que EIZO et ses Distributeurs auront pour option de réparer ou rempla
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los “Distribuidores”), con arreglo y de conformidad con los términos de esta garantía limitada (en lo sucesivo la “Garantía”), garantizan al comprador original (en lo sucesivo el “Comprador original”) que compró el producto especificado en este documento (en lo sucesivo el “Producto”) a EIZO o a sus Distribuidores, que EIZO y sus Distribuidores, a su propio criterio, repararán o sustituirán el P
GARANZIA LIMITATA EIZO NANAO CORPORATION (a cui si farà riferimento da qui in poi con “EIZO”) ed i Distributori autorizzati da EIZO (a cui si farà riferimento da qui in poi con “Distributori”) garantiscono, secondo i termini di questa garanzia limitata (a cui si farà riferimento da qui in poi con “Garanzia”) all’acquirente originale (a cui si farà riferimento da qui in poi con “Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da qui in poi con “
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprunglige köparen (nedan kallad den “Ursprunglige köparen”) som köpte den i dokumentet specificerade produkten (nedan kallad “Produkten”) från EIZO eller Distributörer, att EIZO eller Distributörer enligt eget gottfinnande kostnadsfritt antingen reparera eller byta ut den defekta Pr
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO NANAO CORPORATION (στο εξής «EIZO») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής «Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»), στον αρχικό αγοραστή (στο εξής «Αρχικός Αγοραστής») ο οποίος αγόρασε το προϊόν που καθορίζεται στο παρόν έγγραφο (στο εξής «Προϊόν») από την EIZO ή τους Διανομείς, η οποία εξασφαλίζει ότι η EIZO και οι Διανομείς, σύμφωνα με τη διακριτή ευχέρειά τους, είτε θα επισκευάσουν
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем “Первоначальный покупатель”), который приобрел у EIZO или Дистрибуторов продукт, указанный в этом документе (называемый в дальнейшем “Продукт”), что EIZO или Дистрибуторы на свое усмотрение ли
有限责任保证书 EIZO NANAO 有限公司（以下简称 EIZO ）和 EIZO 授权的经销商（以下简称 经销商 ），接受并依照本有限责任保证书（以 下简称 保证书 ）之条款，向从 EIZO 和经销商购买本文中所规定产品（以下简称 产品 ）的原买方（以下称 原买方 ） 提供保证 ：在保证期内（规定如下），如果原买方发现按本产品所附使用说明书（以下简称 用户手册 ）所述方式正常使 用本产品过程中，本产品出现故障或损坏，EIZO 和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为 (i) 自本产品购买之日起的五 (5) 年期间或限定为到达（ii）使用本产品 3 万小时的期限（以下简称 保证 期限 ），但本产品的液晶显示屏（LCD）的保证期限定为自本产品购买之日起的三 (3) 年期间。EIZO 和经销商将不向原 买方或任何第三方承担本保证书所规定之外的与本产品有关的任何责任或义务。 本产品的任何部件停产七 (7) 年后，EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时，EIZO 与经销商将使 用符合我方质量控制标准的替换零件。 本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定原买
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) 52
