User's Manual

2 / 45
⚫ ROM: 8GB eMMC.
⚫ OS: Embeded linux os,or Android (Confirm when ordering).
⚫ I/O port: 485 output, relay output; WG output is customizable.
⚫ Communication: wired or wireless network(Confirm when ordering).
⚫ Power input: DC 12V.
⚫ Work temperature: 0℃ - 50℃ (For temperature measurement), -10 ℃ - 50℃(Only for Face
recognition).
⚫ Work humidity: <90% RH.
⚫ work environment: indoor, no wind, no direct sunlight.
⚫ Deployment mode: supporting offline operation, or managed by cloud platform, LAN Platform;
web management; installation free.
⚫ Working mode: identity recognition mode, only temperature measurement mode, full open
recognition mode.
1) Identity recognition mode: after the face + body temperature pass, the gate will automatically
open and pass, and strangers will automatically warn and record; after the body temperature is
judged successfully, they will enter the face recognition mode, and strangers will automatically
recognize and upload, which is suitable for recognition and authentication scenarios.
2) Only temperature measurement mode: face recognition doesn’t word, only measure the
temperature and record the photos of the measuring personnel. Applicable to large flow
scenarios.
3) Full open recognition mode: all pass through, automatically recognize face and measure the
body temperature. Any person passing through the machine will be recorded face and body
temperature. Can be used without platform.
⚫ Installation mode: wall hanging, floor type (triangle support), desktop type, gate brake.
2. Instructions for use
⚫ The thermal imaging sensor is imported from abroad. Please calibrate it after 10 minutes before use.
Please calibrate in time after shutdown and site replacement. Our company is not responsible for the
temperature measurement results. All technical standards and test conditions are subject to the
specifications.
⚫ Warm tips: the temperature measurement distance must meet the requirements of specifications and
parameters, and be calibrated. The product shall be installed in the indoor environment. If it is
installed outdoors or semi outdoors, it is recommended to add isolation channel and rainproof and