User Manual
Support address: cs@ekasn.net
About the product manual (described as “manual" for short below)
All Trademarks, Font Size in the manual belong to the owner of their respective
rights.
ΖIWKHFRQWHQWVLQWKHPDQXDOLVGLHUHQWZLWKWKHDFWXDOSURGXFWSOHDVHEHEDVHG
on the actual Product.
If there are any questions about the manual, please contact our company in 7 days
from the day you bought the device, otherwise we’ll think you are agreed with all
the manual contents.
Ȋ7KH$GRSWHG7UDGHPDUNV+'0Ζ+'0Ζ+LJK'HȴQLWLRQ0XOWLPHGLDΖQWHUIDFHDQG
the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries."
Please read this instruction carefully before using the product
Thanks for purchasing and using our company product, in order to make sure your
personal safety and rights, please read our product manual and operating
instructions carefully, our company would not take the responsibility of which
caused by any non-standard operations, please understand.
There is an electronic directions app in the product system
Select how to turn on the projector
1
1. Plug projector into power supply by provided power adapter, please ensure that
the machine has been powered correctly.
Step 1: Turn the ON/OFF switch on device body to the ON position (if it is not
turned on, it cannot be operated),
Note: This product has a built-in battery. After sliding the switch to ON, the indicator
light will be displayed as a red-light source, and it will be displayed as a blue light
source when working.
① Low battery → 5HGOLJKWȵDVKHV
② Charge → JUHHQOLJKWȵDVKHV
③ Fully charged → green light is always on
④ Normal working battery status → blue light is always on
⑤ Standby state → %OXHOLJKWȵDVKHV
Power Button
1 2
English