User's Manual

ManualsBrandsEKEN GROUP ManualsCamera & PhotoACTION CAMERA

Hello

Congratulations on your new camera! This user manual will help you learn the basics of capturing

life’s most incredible moments!

Getting Started

Turn camera ON and repeatedly press the Power/Mode Button to cycle through camera modes.

1. Video (1080p 30fps/ 720p 60fps)

Record Video

2. Playback (Event, Video or JPEG)

View your videos and photos on the screen

3. Settings (Video Settings, Photo Settings, and System Settings)

Repeatedly press the Shutter/Select Button to cycle through three settings. Use the Up or Down

Button to cycle through the Settings options and press Shutter/Select to select desired option.

a. Video Settings:

1) Movie Size: 1080p 30fps or 720p 60fps

Micro SD Card 1080p 30fps 720p 60fps

32 GB 240 mins 320 mins

16 GB 120 mins 160 mins

8 GB 60 mins 80 mins

4 GB 30 mins 40 mins

Summary of content (4 pages)

PAGE 1
Hello Congratulations on your new camera! This user manual will help you learn the basics of capturing life’s most incredible moments! Getting Started Turn camera ON and repeatedly press the Power/Mode Button to cycle through camera modes. 1. Video (1080p 30fps/ 720p 60fps) Record Video 2. Playback (Event, Video or JPEG) View your videos and photos on the screen 3. Settings (Video Settings, Photo Settings, and System Settings) Repeatedly press the Shutter/Select Button to cycle through three settings.
PAGE 2
) Loop Record: On/Off 3) Date Stamp: Off/Date/Date & Time 4) Exposure: +-2.0/+-1.7/+-1.3/+-1.0/+-0.7/+-0.3/0 b. Photo Settings: 1) Resolution: 2M 2) Single Shot: On/Off 3) Treble Shot (Burst Photo 3 photos): On/Off 4) Selftimer (Time Lapse): OFF/5 Seconds/ 10 Seconds/ Double Shoot a series of photos at set time intervals 5) Continuous (Burst Photo): 2, 3, 5, 10, 20, 30 or 60 second intervals c.
PAGE 3
This camera is compatible with 4GB, 16GB, and 32GB capacity microSD, microSDHC, and microSDXC memory cards. You must use a microSD card with a Class 10 speed rating. We recommend using brand name memory cards for maximum reliability in high-vibration activities. Charging the Battery If recording is occurring when battery reaches 0%, the camera will save the file and power OFF. To charge the battery: 1. Connect the camera to a computer or USB power supply. 2.
PAGE 4
undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.