Installation Guide

PVC Medallions
installation instructions:
Power Grab Adhesive
Sand Paper
Cloth
STEP BY STEP
INSTRUCTIONS
TOOL & MATERIAL
CHECKLIST
SPECIAL INSTRUCTIONS
AND NOTES
EXAMPLE
INSTALLATION DIAGRAMS
Thoroughly read through the installation instructions to familiarize yourself with the
process before you begin installation.
Before installing, acclimate the product in the room where you will be installing them.
It is recommended that you nish the medallion.
SAFETY INSTRUCTIONS
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.
1. It is recommended that you prepare the instal-
lation surface with sandpaper by removing
excessive bumps and/or texture. Wipe clean and
apply primer to ensure proper adhesion.
2. Apply adhesive to the back of the ceiling
medallion on the ouside of the groove. (Follow
adhesive manufacturer’s instructions for proper
application)
3. Push the medallion in place rmly and you are
done.
Note: Once installed, you can leave the medallion
with its white factory nish, or prime and paint
any desired color.

Summary of content (1 pages)