Installation Instructions

WOOD APPILIQUES & ONLAYS
installation instructions:
wood glue
wood ller/putty
nail gun/hammer
nishing nails
extra ne sandpaper
putty knife
TOOL & MATERIAL
CHECKLIST
IMPORTANT INFO
• It is highly recommended that you paint/nish our appliques before you install them. Once in-
stalled, you can apply any necessary touch‐up paint/nish.
• ‐Clean installation surface and back of appliques of all dirt and dust with a clean cloth or sponge.
• ‐Make sure that the surface and the back of the applique are completely dry before attempting
installation.
• ‐Measure and mark the location where the applique is going to be installed.
SAFETY INSTRUCTIONS
Make sure to use the correct tools recommended.
Wear safety goggles.
Follow xture, power tools, and paint manufacturers’ instructions and users manuals.
Use common sense and follow good construction practices.
1. Lay the applique face down on a soft surface that will not scratch/dent the
applique detail.
2. Apply a 1/2” bead of wood glue all the way around the back edge of the
applique.
3. Wipe off any excess wood glue with a sponge or damp rag.
4. Secure the applique or onlay in place with nishing nailes.
5. Fill any holes or blemishes with wood ller or putty, let dry, and sand down.