Installation Guide

www.ekenamillwork.com · Phone: [phone] · Fax: [phone] · [e-mail]
Endurathane Wall Panels
Installation Guide
The Manufacturer has provided these instructions as installation guidelines in accordance with ASTM E-330. The
manufacturer, however neither installs the panels nor has any control over the installation. It is the responsibility of the
contractor and/or the installer to ensure panels are installed in accordance with these instructions and any applicable
building codes. The manufacturer assumes no liability for either improper installation or personal injury resulting from
improper use of or installation.
Ekena products alone may not constitute a waterproof installation!
Flashing and caulking should be added as needed in such areas as transition from Ekena panels, ledgers and/or trims
to other siding products, windows, and doors to control moisture and protect the sub wall assembly. Urethane paneling
expands and contracts with temperature changes (average shrinkage on exposed paneling is about .039” per foot), so
install panels with appropriate number of screws. Never leave cut edges exposed; exposed polyurethane will discolor
and become obvious with exposure to sunlight. Use Ekena touch-up paint or color match with a good quality exterior
latex paint. Any deviation from these standard installation instructions must be made watertight by use of a vapor
barrier behind the product and then sealed with grout and painted with touch-up paint.
Basic Use
Ekena products are intended for interior or exterior nonstructural use as a lightweight veneer facing on masonry, metal
framed, or wood framed construction for architectural aesthetics. These products are suitable for use on residential
and commercial projects of many types. Ekena foam veneer panels are made of high-density polyurethane and molded
from actual stone, rock or brick. A unique manufacturing process creates lightweight simulated stone panels that
provide enhanced durability, water resistance, signicant weight reduction, and lower installation costs. No additional
foundation or structural support is required. Installation is quick and easy, and costs far less than a full thickness natural
or cement stone wall.
General Guidelines
Sheathing must be properly fastened to the framing according to building code requirements and/or the sheathing
manufacturer’s recommendations. Ekena products should be applied over a sheathing that provides a smooth, at,
solid, non-expansive, stable surface. For exterior applications make sure sub wall assembly is weather tight before
applying Endurathane Wall Panels. Wall sheathing should be weather resistant, or covered with a weather resistant
barrier such as fanfold insulation, house wrap or building paper. Consult local building codes for complete information
and requirements.