Specification

1
Architectural Specications
Hardwood Carvings
1.1 Selection Includes
Hardwood Carvings
2.4 Finish
Materials are fully sanded and shipped raw/unnished.
3.1 Installation
Install in accordance with manufacturer’s instructions.
1.2 Project Conditions
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum
results. Do not install products under environmental conditions outside manufacturer’s limits.
2.1 Acceptable Manufacturer
A. Ekena Millwork
2300 Main Street
Clarksville, TX 75426
866-607-0453
www.ekenamillwork.com
B. Substitutions: Not permitted.
2.2 Materials
Wood: Carved from kiln-dried hardwood. (Alder, Red Oak, Maple, Mahogany, Walnut, Cherry, Rubberwood, Lindenwood)
2.3 Fabrications
Carved items are milled in hardwoods to exacting dimensions. For larger items, individual pieces of lumber are assembled into a
block using strong Type-I waterproof glue. Pressure is applied around the blocks transforming the individual lumber into a single unit,
ready for precision carving.
Part 1: General
Part 2: Products
Part 3: Execution

Summary of content (1 pages)