Installation Guide

APPLIQUES & ONLAYS
installation instructions:
construction adhesive
elastomeric adhesive caulk
caulking gun
nail gun
nishing nails
extra ne sandpaper
putty knife
TOOL & MATERIAL
CHECKLIST
IMPORTANT INFO
• It is highly recommended that you paint/nish our appliques before you install them. Once in-
stalled, you can apply any necessary touch‐up paint/nish.
• ‐Clean installation surface and back of appliques of all dirt and dust with a clean cloth or sponge.
• ‐Make sure that the surface and the back of the applique are completely dry before attempting
installation.
• ‐Measure and mark the location where the applique is going to be installed.
SAFETY INSTRUCTIONS
Make sure to use the correct tools recommended.
Wear safety goggles.
Follow xture, power tools, and paint manufacturers’ instructions and users manuals.
Use common sense and follow good construction practices.
Medallions are not load‐ bearing. Do not use them to support electrical xtures or ceiling fans.
1. Lay the applique face down on a soft surface that will not scratch/dent the
applique detail.
2. Apply a 1/2” bead of adhesive caulk all the way around the back edge of the
applique.
3. When pressing the applique up against the surface, some adhesive caulk will
seep out. Smooth excess caulk around the applique with a nger or the putty
4. knife and apply extra caulk that is needed to ll in any gaps.
5. Wipe off any excess adhesive caulk with a sponge or damp rag.
6. Larger appliques will need to be installed with nails in addition to the
adhesive.