Specifications

Ǧ CRAFTSMAN CAP/BASE
PEDESTAL / NEWEL TRIM KIT STYLES
The Trim Kits for non-tapered Craftsman Series pedestals consist of a mitered wrap or a molding, with a 1” thick top platform.
For pedestals, the top platform has the same “V” cut as the tapered cap/base platforms. The top platform is shipped without
the “V” cut when used for a newel post. Another newel post option, the pyramid cap, may be substituted for the top platform.
For non-standard shaft sizes, the widths of the trim kits will adjusted accordingly. The heights however will remain the same. The
height of the Standard Trim (B) may be changed at the customer’s request. When considering the space requirements to wrap
the load support, the inside width of the pedestal shaft is the specification which would be applicable. See the Pedestal / Newel
specifications page for inside widths, shaft sizes, and styles available.
AA
DD
B
BB
C
E
Standard Trim Prairie Trim
Pyramid Cap
F
Pedestal / Newel Trim Kit Specifications
Column
Nominal
Width
Standard Trim Prairie Trim
Platform Pyramid Cap
Width (A) Height (B)
Base Width
(A)
Base Height
(B)
Top Height
(C)
Top Width
(D)
Cap Height
±
1/16” (E)
Cap Width
(F)
6” 6 7/8 3 1/4 8 1/8 3 1/4 2 1/8 7 5/8 2 1/16 7 7/8
8” 8
7/8 3 1/4 10 1/8 3 1/4 2 1/8 9 5/8 2 1/2 9 7/8
10” 10 7/8 3 1/4 12 1/8 3 1/4 2 1/8 11 5/8 2 7/8 11 7/8
12” 12 7/8 3 1/4 14 1/8 3 1/4 2 1/8 13 5/8 3 1/4 13 7/8
14” 14 7/8 3 1/4 16 1/8 3 1/4 2 1/8 15 5/8 3 5/8 15 7/8
16” 16
7/8 3 1/4 18 1/8 3 1/4 2 1/8 17 5/8 4” 17 7/8
18” 18 7/8 3 1/4 20 1/8 3 1/4 2 1/8 19 5/8 4 3/8 19 7/8
20” 20
7/8 3 1/4 22 1/8 3 1/4 2 1/8 21 5/8 4 13/16 21 7/8
22” 22 7/8 3 1/4 24 1/8 3 1/4 2 1/8 23 5/8 5 3/16 23 7/8
24” 24
7/8 3 1/4 26 1/8 3 1/4 2 1/8 25 5/8 5 9/16 25 7/8
26” 26 7/8 3 1/4 28 1/8 3 1/4 2 1/8 27 5/8 6 5/16 27 7/8
28” 28
7/8 3 1/4 30 1/8 3 1/4 2 1/8 39 5/8 6 3/8 29 7/8
30” 30 7/8 3 1/4 32 1/8 3 1/4 2 1/8 41 5/8 6 3/4 31 7/8
† Platform widths apply to pedestals and newels, unless the newel is using the pyramid cap.