User Manual

Architectural Grade PVC products require painting. For best results, prime the product thoroughly to achieve a
smooth, consistent, paint-ready surface. The carved areas may require additional prime coats. Once priming is
finished, paint the product with a good quality, vinyl safe 100% acrylic latex paint. If painting the product a dark
color, colors that have an LVR rating of 54 or lower, use paints with heat reflective characteristics specifically
formulated for use on vinyl or PVC products. For dark colors, consultation with your local paint company is highly
recommended.
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, LIABILITIES OR OBLIGATIONS OF EKENA, EITHER
EXPRESSED OR IMPLIED, EXCEPT THAT THE DURATION OF ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME TO THE DURATION OF THIS WARRANTY. EKENA SHALL
IN NO EVENT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL OR SPECIAL DAMAGES OF ANY KIND. YOUR
EXCLUSIVE REMEDY SHALL BE ENFORCEMENT OF THIS WARRANTY UPON THE TERMS AND CONDITIONS HERIN
CONTAINED. NO REPRESENTATIVE OF EKENA OR ITS DISTRIBUTORS OR DEALERS IS AUTHORIZED TO MAKE ANY
CHANGE OR MODIFICAITON TO THIS WARRANTY.
Some States do not allow limitations on how long an implied warranty lasts, so the foregoing limitation may not
apply to you. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Ekena Millwork PVC Millwork Limited Lifetime Warranty
Ekena Millwork provides a LIFETIME WARRANTY to the original purchaser of our line of PVC millwork. This LIFETIME WARRANTY provides
that the PVC material will be free from manufacturer defects in material and workmanship under approved normal use.
Ekena’s warranty covers only manufacturing defects identified above. This warranty does not cover damage caused by other factors,
including but not limited to: normal weathering (defined below), misuse, negligence or improper installation, failure to provide reasonable
maintenance to prevent accumulation of dirt, mildew, staining materials, pollution, exposure to chemical products or incompatible
cleaners, alterations like applying incompatible coatings, stains or varnishes (see technical information for compatible coatings if any),
improper handling or storage, defects in the wall structure (materials or construction) on which Ekena’s products are installed which cause
failure, such as movement, cracking or settling of the wall, foundation or building, deformation caused by high heat sources including but
not limited to grills, fire pits, foil sheathing, low e-glass windows and low e-glass doors, damage caused by animals or insects, impact of
foreign objects, hail, lightning, fire, hurricane, tornadoes, or other Acts of God, vandalism, intentional damage, riot or insurrection.
The claimant must provide date of installation and proof of property ownership. The claimant may be required to submit a sample of the
defective materials for analysis. This sample may need to be removed from the property at the property owner’s expense. Ekena will
analyze the material claimed to be defective and determine the validity of the claim.