Installation Guide

SHUTTER LOCK PLACEMENT INSTALL INSTRUCTIONS
Shutters Smaller
Than 47”
* Shutters smaller than 47”
require 4 shutter locks
Shutters Larger
Than 47”
* Shutters larger than 47”
require 4 shutter locks
1. Place shutter next to window in desired loca-
tion.
2. Shutters with heights through 47” require 4
fasterners per shutter as shown on the shutter to
the left. Shutters over 47” in height require 6 fast-
erners per shutter as shown in the picture to the
left.
3. Drill 1/4” diameter holes 3” deep at locations
shown in step 2. When installing on any horizontal
siding locate the hole so that you drill the siding at
its high point. (Drill within 1” of the point at which
the siding contacts the shutter.) See pictures for
steps #3 and #4 clarifcation.
4. Insert fastener in hole in shutter and tap
through the shutter and into the wall. Do not hit
any harder than is necessary to seat it.
5. Make sure that the fastener is snug against the
shutter at all points as to not dimple the shutter.
3”
[phone]
EKENAMILLWORK.COM
CONTACT:
VINYL SHUTTER INSTALL
DO NOT PAINT:
The color of these shutters is guaranteed for 40
years not to chip, flake, or discolor. To achieve this
we have molded the color in the plastic, making it
unpaintable. If you need a paintable shiutter, order
“color” #30.