Installation Guide

WOOD APPLIQUES & ONLAYS
installation instructions
TOOL & MATERIAL
CHECKLIST
SAFETY INSTRUCTIONS
WOOD
GLUE
SPECIAL INSTRUCTIONS
AND NOTES
STEP BY STEP
INSTRUCTIONS
EXAMPLE
INSTALLATION DIAGRAMS
• It is highly recommended that you paint/nish our appliques before you install them.
Once installed, you can apply any necessary touch‐up paint/nish.
• Clean installation surface and back of appliques of all dirt and dust with a clean cloth or
sponge.
• Make sure that the surface and the back of the applique are completely dry before
attempting installation.
• Measure and mark the location where the applique is going to be installed.
1. Lay the applique face down on a soft surface that
will not scratch/dent the applique detail.
2. Apply a 1/2” bead of glue all the way around the
back edge of the applique.
3. When pressing the applique up against the sur-
face, some glue will seep out. Smooth excess
caulk around the applique with a nger or the put-
ty knife and apply extra glue that is needed to ll
in any gaps.
4. Wipe off any excess adhesive caulk with a sponge
or damp rag.
5. Larger appliques will need to be installed with
nails in addition to the adhesive.
Wood Glue
Nail Gun
Finishing Nails
Extra Fine Sandpaper
Putty Knife
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.