User Manual

PVC ROSETTE
installation instructions
TOOL & MATERIAL
CHECKLIST
SAFETY INSTRUCTIONS
SPECIAL INSTRUCTIONS
AND NOTES
STEP BY STEP
INSTRUCTIONS
EXAMPLE
INSTALLATION DIAGRAMS
• It is highly recommended that you paint/nish the rosette with 100% acrylic
latex paint before installation. Once installed, you can apply any necessary
touch-up paint/nish.
• Clean installation surface and back of rosette of all dirt and dust with a clean
dry cloth.
• Measure and mark the location where the rosette is going to be installed.
• Align the top and bottom edge flush with transition moulding or casing used.
1. Apply adhesive to the back of the ro-
sette and press rmly against the
installation surface. Some adhesive may seep
out, smooth excess and apply caulk around the
edge if needed to ll in any gaps.
2. Wipe off any excess caulk with a damp rag.
3. Complete installation with small nishing nails.
4. Fill nail holes with caulk.
5. Apply any necessary touch-up paint.
construction adhesive
caulk
caulking gun
nail gun
nishing nails
extra ne sandpaper
paint
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.
We Can Help. Call [phone]
www.ekenamillwork.com
Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork