Installation Guide

STAIR BRACKETS
installation instructions
TOOL & MATERIAL
CHECKLIST
SAFETY INSTRUCTIONS
SPECIAL INSTRUCTIONS
AND NOTES
STEP BY STEP
INSTRUCTIONS
EXAMPLE
INSTALLATION DIAGRAMS
• It is highly recommended that you paint/nish the stair bracket with 100% acrylic latex
paint before installation.
• Once installed, you can apply any necessary touch-up paint/nish.
• Clean installation surface and back of bracket of all dirt and dust with a clean cloth or
sponge.
• Make sure that the surface and the back of the bracket are completely dry before
attempting installation.
1. Lay the bracket face down on a soft surface that
will not scratch/dent the bracket.
2. Apply a 1/2” bead of adhesive caulk all the way
around the back edge of the bracket.
3. Press the bracket in place against the corner
angle of the stair. Smooth caulk around the edge
with a nger.
4. Wipe off any excess adhesive caulk with a sponge
or damp rag.
5. Small nishing nails can be used for additional
support.
construction adhesive
caulking gun
nail gun
nishing nails
extra ne sandpaper
rag
paint
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.
We Can Help. Call [phone]
www.ekenamillwork.comIndustry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork