Installation Guide

ARCHITECTURAL PVC SHUTTER FAQS
What is PVC?
Each shutter is made of stable high-density cellular PVC that won't rot, split or chip, and doesn’t
absorb water. PVC resists all forms of insect infestations, mold and mildew.
PVC shutters are recommended for fixed mount installation only.
GENERAL DO’s & DON’Ts:
• Allow shutters to acclimate to environment/temperature for at least 24 hours before
installing.
• Store shutters lying flat until installation.
• Brackets should be installed at the top, bottom, and middle of shutter for best results. If not
installed correctly, shutters can bow or warp.
• For shutters in full sun exposure, light paint colors are recommended.
What paint can I use on PVC?
It is recommended to use 100% acrylic latex paint with an LRV of 55 or higher.
For paint colors with an LRV of 55 or lower, you MUST use a paint that has been specifically developed for application on
PVC. Using paint with an LRV below 55 allows the product to absorb excessive heat, which may cause PVC shutters to
bow or buckle.
Always consult the paint manufacturer for the LRV of your paint choice and follow the paint manufacturer’s
recommendations for the use and application of the paint.
WARNING: Should you choose to paint a darker color (LRV of 54 or lower) your warranty could be voided.
Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork.