User Manual

ManualsBrandsEkena Millwork ManualsEkena Millwork Molding19 5/8"W x 19 5/8"H Dublin EnduraWall Decorative 3D Wall Panel, White

Table Of Contents

3D Wall Panels

installation instructions:

Construction Adhesive

Utility Knife, Circular Saw, or Table Saw

Paint, Brush and/or Roller

Measuring Tape

Sand Paper

Sheetrock Compound (Optional, see instructions)

Putty Knife (Optional, see instructions.)

STEP BY STEP

INSTRUCTIONS

TOOL & MATERIAL

CHECKLIST

SPECIAL INSTRUCTIONS

AND NOTES

EXAMPLE

INSTALLATION DIAGRAMS

• Thoroughly read through the install instructions to familiarize yourself with the process

before beginning installation.

• Before installing, acclimate the thermoformed PVC panels in the room where you will

be installing them.

• In most applications you will have to trim some panels. Cut them with a standard utility

knife or power tool, such as a table saw. Sand cut edge to remove debris.

• Depending on your installation method, you will have to choose the correct adhesive.

SAFETY INSTRUCTIONS

Make sure to use the correct tools recommended.

Wear proper protective gear.

Follow xture, power tools, paint manufacturers’ instructions, and users manuals.

Use common sense and follow good construction practices.

1. Smooth installation surface with sandpaper by

removing excessive bumps or texture. Wipe wall

clean to clear debris.

2. Mark the installation points using a straight edge

and level.

a. On a wall with one corner start at the end of

the wall and work towards the corner (Diagram

A).

b. For a wall with two corners start at the center

and work out (Diagram B).

3. Apply adhesive to the back of the panel and the

installation area. (Follow adhesive manufactur-

er’s instructions for proper application)

a. Install panels side by side. These panels are

designed to minimize the appearance of

seams. (Diagram C).

b. For a seamless appearance, leave a 1/16 inch

gap between each panel. After the panels have

dried, apply a layer of primer over the surface.

Once the primer has dried, go over the seams

with sheetrock compound. This may take two

or more applications. Be sure to sand between

each application. (Diagram D). Once installed

paint with 100% acrylic latex paint in desired

color.

Diagram A

Diagram C

Diagram B

Diagram D

We Can Help. Call (866) 607-0453

www.ekenamillwork.com

Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork

Summary of content (13 pages)

PAGE 1
installation instructions: 3D Wall Panels SAFETY INSTRUCTIONS Make sure to use the correct tools recommended. Wear proper protective gear. Follow fixture, power tools, paint manufacturers’ instructions, and users manuals. Use common sense and follow good construction practices. TOOL & MATERIAL CHECKLIST Construction Adhesive SPECIAL INSTRUCTIONS AND NOTES • Utility Knife, Circular Saw, or Table Saw Paint, Brush and/or Roller before beginning installation.
PAGE 2
ARCHITECTURAL PVC FAQS What is PVC? Each piece of Cellular PVC is made of stable high-density PVC that won't rot, split or chip, and doesn’t absorb water. PVC has a closed cell nature, so water cannot penetrate the product and it resists all forms of insect infestations, mold and mildew. What types of special skills are needed to install PVC products? None. If you can install wood products, you can easily install PVC products. They can be nailed, cut and sanded just like wood products.
PAGE 3
ARCHITECTURAL PVC FAQS What paint can I use on PVC? If you choose to paint, use 100% acrylic latex paint with an LRV of 55 or higher. Definition of LRV (Light Reflective Value): LRV is the amount of light reflected from a painted surface. Black has a reflectance value of Zero (0) and absorbs all light and heat. White has a reflectance value of nearly 100 and keeps a building light and cool. All colors fit between these two extremes. Light Reflective Values are given as a percentage.
PAGE 4
PERF OR RM MANC MA AN A NC N CE A AN N D PPROTE R O T C TION YOU OU CAN C COUN CO OU O UNT O ON N.
PAGE 5
YOU C AN DEPEND ON IT. S U P E RPAI N T ® P ER FO R M ANCE HAS STOOD THE TES T OF T IME . You can count on SuperPaint Exterior Latex Paint to deliver outstanding performance and protection against the elements. peeling and blistering in hot and humid conditions. With its fast, efficient application, SuperPaint will increase your production year-round. And with its ability to withstand the elements, it will minimize repaints, keep costs down, and lead to more satisfied customers and referrals.
PAGE 6
Resilience RESI LI EN C E ® LETS YOU PAINT W ITH CONF IDEN C E N O MATTER W HAT THE F OREC AST.
PAGE 7
TH I S H I G H-HIDING EXTERIOR F INIS H FE ATU R ES EASY APPLIC ATION, A PREM IUM SM OOT H FI NI SH AN D EXC EPTIONAL M OIS TURE RES IS TANC E . hours rather than the four-hour minimum most coatings require. Resilience® Paint is the perfect choice for residential and commercial exteriors. It has outstanding hide, easy brushability and exceptional resistance to moisture. With premium durability, backed by a lifetime limited warranty, you can count on Resilience no matter what the forecast.
PAGE 8
Emerald R EVO LUTIONARY TECHNOLOGY. BEST- I N - C LASS OVERALL PERF ORM ANCE.
PAGE 9
EXC EP TI ONAL DURAB ILITY, BEAUTY AND APPLIC ATION. Emerald® Exterior Acrylic Latex is a breakthrough paint technology from Sherwin-Williams, offering premium performance that stands the test of time. Featuring rugged resistance to blistering, peeling, chalking, fading and dirt pickup, Emerald is self-priming and can be applied in temperatures down to 35°F. Emerald delivers innovative durability, hide and beauty for a truly outstanding finish.
PAGE 10
Duration ® FO R EXC ELL ENT DURABILITY AND HIDE.
PAGE 11
O N E- C OAT C O N VENIENCE ON REPAINTS . EXCEL L E N T R ESI STAN C E TO PEELING AND BLIS TERING. Duration® Exterior Coating is formulated with PermaLast™ Technology and infused with advanced acrylic co-polymers for long-lasting performance. Duration has a high film build and provides a thick, flexible layer which results in excellent hide and protection from peeling and blistering. And Duration now has a longer open time to easily achieve a smooth appearance.
PAGE 12
SnapDry D ELI VER S A HARD, DURABLE F INIS H, FAS T.
PAGE 13
OU TS TANDING RESULTS , WITHOUT THE WAIT. SnapDry™ Interior/Exterior Door and Trim Paint dries in a fraction of the time of other trim paints. With sleek, appealing results in as little as an hour, you’ll increase efficiency and reduce downtime. SnapDry eliminates the need to leave doors and windows open for hours after application. It also delivers a durable finish that will stand the test of time, both inside and out.