User Manual

ATTENTION: Batteries should only be installed by an adult.
The unit comes with batteries already installed. These batteries
are meant for in-store demonstration use only, and should be
replaced with fresh batteries. To replace the batteries at home,
follow these instructions for each blaster:
1 Use a Philips screwdriver to open the battery compartment
door on the bottom of the unit.
2 Install 3 "AA" size batteries into the compartment, making
sure that the + and - polarities match the diagram printed
inside.
3 Close the battery compartment door and tighten the battery
door screw. Don’t over tighten.
For the Best Possible Performance
• Only use the recommended/supplied batteries or equivalent.
• Use alkaline batteries for longer life.
• Do not mix old and new batteries, and do not mix alkaline,
carbon-zinc or rechargeable nickel-cadmium batteries.
• Insert batteries with proper polarity (+/–) as indicated.
• Remove exhausted batteries from product.
• Recharge rechargeable batteries under adult supervision.
• Do not attempt to recharge non-rechargeable batteries.
• Do not open batteries or heat them beyond normal ambient
temperatures.
• To prevent battery leakage or damage remove batteries from a
product if it will not be used for a month or longer.
• Use extreme caution handling leaking batteries (avoid direct
contact with eyes and skin). If battery leakage comes in contact
with eyes, IMMEDIATELY flush the eye with lukewarm and
gently flowing water for at least 30 minutes. If skin contact
occurs, wash skin with clear water for at least 15 minutes. Seek
medical attention if any symptoms occur.
• Store in cool, dry, ventilated area away from hazardous or
combustible material.
• Do not dispose of batteries in the household trash or fire.
• Follow applicable laws and local regulations for the disposal and
transportation of batteries.
Installing the Batteries
Battery Installation
MODEL: AD-106
Important Message to Customers
Thank you for purchasing one of our many top-quality electronic products
Please take a moment to read through these
instructions to help you understand the safe and proper way to use this toy to extend its usability.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
CAN ICES-3 (B)/NMB-3(B)
Genie Lamp
Speaker
MODEL: AD-106
INSTRUCTION MANUAL (FRONT)
DATE : OCT 31 2018
SIZE: 180 L x 230 H mm
COLOR : PRINT BLACK, 1C + 1C
MODEL: AD-106
INSTRUCTION MANUAL (BACK)
DATE : OCT 31 2018
SIZE: 180 L x 230 H mm
COLOR : PRINT BLACK, 1C + 1C
Maintenance
eKids warrants this product to be free from defects in workmanship and
materials, under normal use and conditions, for a period of one (1) year from
the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first
return it to the store where it was originally purchased. Should this fail to
resolve the matter and service still be required by reason of any defect or
malfunction during the warranty period, eKids will repair or, at its discretion,
replace this product without charge. This decision is subject to verification of
the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service. If service is required, please call
Customer Service at 1-888-TOP-TOYS (867-8697) to obtain a Return
Authorization Number and shipping instructions. A copy of the sales receipt is
required to validate in-warranty coverage.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for
which it was designed. It does not cover (i) products which have been
damaged by negligence or willful actions, misuse or accident, or which have
been modified or repaired by unauthorized persons; (ii) cracked or broken
cabinets, or units damaged by excessive heat; (iii) damage to digital media
players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not
extend to owners of the product other than to the original purchaser. In no
event will eKids or any of its affiliates, contractors, resellers, their officers,
directors, shareholders, members or agents be liable to you or any third party
for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on
implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the
above mentioned disclaimer of warranty is contractually binding to you upon
your transfer of currency (money order, cashier's check, or credit card) for
purchase of your eKids product.
© 2019 eKids, LLC. All Rights Reserved.
1299 Main Street Rahway NJ 07065
Printed in China AD-106-103118-A
Genie Lamp Controls
It is important to keep the unit as dry and clean as possible. Clean
the unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials are not
recommended, as they may damage the surface of the unit.
Limited One Year Warranty
This unit ships in Demo Mode for in-store
demonstration purposes. When ready to
play, slide the ON/OFF/DEMO Switch to
ON Mode.
For questions or comments regarding this or other eKids
products, please call our toll-free number: 1-888-TOP-TOYS.
Please also visit our website: www.ekids.com
ON/OFF/DEMO Mode
Questions or Comments?
ON/OFF/DEMO Switch
Slide the switch to the ON position to play
with the speaker.
Wake/Demo Button
Press to hear speech and sound effects!
Magic Sensor
Gently rub the magic sensor on the side of
the lamp. When you hear a prompt from
Genie, make a wish, then listen for Genie’s
answer!
Volume Switch
Adjust the volume by sliding the switch to
Low, Medium, or High.
AUX-IN Jack
Connect one end of a 3.5mm audio cable
(not included) into the AUX-IN jack and the
other end to the headphone jack of your
audio device.
Press PLAY on your audio device to start
playback. Control and navigate tracks from
your audio device, too.
Volume Switch
Low, Medium, High
ON/OFF/DEMO Switch
AUX-IN Jack
Wake/Demo Button
Magic Sensor
Area
Note: The speaker will automatically time out after 20 minutes.
Press Wake/Demo to resume audio.