Instruction Manual

__________________________________________________________________________________

DESCRIPTION

Your Package includes

1) Jump Start Battery Harness,

1) Plug in Jump Start cable,

1) Set of Plug in Alligator Clips

NOTE! READ ALL INSTRUCTIONS BEFORE INSTALLATION

The New EKLIPES™ Universal Bike-2-Bike Plug in Jump Start Kit is like no other Jumper Cable System in the World! This

Jump start System comes with our EK1-153 Battery Harness Which is actually two Battery Harness’s in one housing with 2

Plugs.

The Package includes our New 2 Ft 3 inch Jump-Start Battery Harness, with Red Battery Eyelet

for positive and Black Battery

Eyelet for negative.

PAGE 1
__________________________________________________________________________________ DESCRIPTION Your Package includes 1) Jump Start Battery Harness, 1) Plug in Jump Start cable, 1) Set of Plug in Alligator Clips NOTE! READ ALL INSTRUCTIONS BEFORE INSTALLATION The New EKLIPES™ Universal Bike-2-Bike Plug in Jump Start Kit is like no other Jumper Cable System in the World! This Jump start System comes with our EK1-153 Battery Harness Which is actually two Battery Harness’s in one housing with 2 Plugs.
PAGE 2
This harness has 2 electrical plugs. One plug is a SAE Plug with an inline 15 amp fuse link to protect all your electronic devices and the other plug is a Dims 12 gauge female BMW Jumper Plug which does not have an inline fuse link, so make sure you test the Dims Female BMW plug as seen in the picture below continuously during your installation.
PAGE 3
Furthermore, if you are not experienced with working on Motorcycles, or any other Power Sports vehicles we recommend you have your new EKLIPES™ unit installed by an Authorized Motorcycle Dealer.
PAGE 4
Now that you have your Jump Start Battery Harness installed correctly on your bike all you have to do when you need a Jump Start is Plug in the Jump Start Cable to the Battery Harness and If the other Bike you want to Jump from has one of our Jump Start harness on his bike then all you have to do is plug the cable into his Harness and you are ready to go.